Steel Table Legs, 1-1/8" Adjustment, 2-3/8" Diameter, Standard Table Height 27-3/4" Adjustable Foot, Chrome - Single Pack

Steel Table Legs For Standard Table Height

Steel table legs from the Camar Hamburg Series give you a heavy-duty support option for work surfaces and tables where a standard table height is needed. Each leg is designed as a steel table leg with a 27-3/4 inch length at table height, so it suits typical desk or worktable builds where sitting ergonomics matter. The 2-3/8 inch diameter steel construction provides substantial section strength, which supports stability on work surfaces that carry tools, fixtures, or heavy materials. A load bearing capacity of 660 lbs per leg means one leg handles significant static loads, which helps when building long spans with multiple legs under solid tops. The chrome finish creates a clean, reflective look on exposed legs, which works well in office, shop, or customer-facing bench installations. Built-in adjustable feet with 1-1/8 inch of adjustment allow height tuning at the floor, which helps when leveling on uneven substrates or matching existing surface heights.

Key Hamburg Series Table Leg Advantages

• The 660 lb load bearing capacity per leg supports heavy table tops or work surfaces, which matters when installing dense materials or equipment that concentrate weight on limited support points.
• The 27-3/4 inch standard table height length aligns with typical sitting-height tables, which simplifies planning when matching common chair heights and ergonomic layouts in offices or shops.
• The 2-3/8 inch diameter steel tube construction provides a wide footprint at the floor, which helps reduce wobble and deflection when tables are bumped or loaded near the edge.
• The built-in foot with 1-1/8 inch adjustment range lets you fine-tune leg height, which is useful for compensating for floor irregularities and bringing multi-leg assemblies into a level plane.
• The chrome finish gives the leg a bright, metallic appearance, which fits projects where exposed structure doubles as a visual design element in workrooms, studios, or customer areas.

Adjustable Chrome Leg Details For Straightforward Mounting

This Camar Hamburg Series steel table leg is supplied at a table-height length of 27-3/4 inches, which simplifies layout when setting heights across multiple workstations that share a common top thickness. The 2-3/8 inch diameter gives the steel tube a substantial profile, which helps control flex in taller table assemblies that see side loading. A built-in adjustable foot with 1-1/8 inch of travel is integrated into the leg, so vertical changes are handled at the floor contact point rather than at the top connection. This floor-side adjustment helps maintain a solid interface at the mounting bracket while still allowing fine leveling. When multiple legs support a single surface, the shared adjustment range helps bring all contact points into the same plane so the top bears evenly.

Using Camar Hamburg Series Legs In Real Projects

Where This 27-3/4 Inch Chrome Leg Fits Best

The Hamburg Series steel table leg at 27-3/4 inches targets standard table height applications, which suits desks, assembly tables, and general work surfaces where seated work is typical. The 660 lb load bearing capacity per leg supports installations under thick wood tops, engineered panels, or composite work surfaces that need strong point supports. With its 2-3/8 inch diameter, the leg presents a clean cylindrical profile that works in open-leg layouts where structure stays visible. The chrome finish adds a reflective metallic surface, which integrates into modern interiors, shop offices, or display settings where metal details complement surrounding hardware. Because the leg is part of a Hamburg Series that also offers counter and bar height lengths, it allows consistent visual language across spaces that need different working heights while maintaining matching diameter and style.

How Hamburg Series Details Support Consistent Results

Camar Hamburg Series steel table legs share a 2-3/8 inch diameter across their height options, which simplifies planning when mixing standard table height with counter or bar height surfaces in the same project. The 27-3/4 inch table height version pairs that diameter with a 660 lb load rating per leg, so each support handles substantial static loads without requiring oversized spacing between legs. The built-in 1-1/8 inch adjustment in the foot concentrates height changes at the bottom, which helps keep the leg-to-top joint tight while still giving vertical tuning on uneven floors. This is especially useful when aligning multiple tables side by side, because the shared adjustment range lets you dial in top alignment across seams. The chrome finish applied to the steel leg keeps appearance consistent with other chrome elements in a room, which supports unified hardware selection across drawer pulls, supports, and visible fittings.

Common Questions About This Camar Table Leg

Select This Steel Table Leg For Heavy-Duty Tables

The Camar Hamburg Series steel table leg at 27-3/4 inches combines a 2-3/8 inch diameter steel tube, chrome finish, and 660 lb load capacity per leg for demanding table-height projects. The 1-1/8 inch built-in adjustable foot supports precise leveling across uneven floors. For work surfaces, desks, and assembly tables that must balance appearance with strength, this Hamburg Series chrome leg delivers a consistent diameter and finish that align well with other metal details in the space. Use this leg when planning standard-height tables that need both load capacity and straightforward floor-side height adjustment.