Steel Table Legs, 1-1/8" Adjustment, 2-3/8" Diameter, Standard Table Height 27-3/4" Adjustable Foot, Chrome - Set of 4

Steel Table Legs Chrome For Work Surfaces

Steel table legs chrome describe Camar Hamburg Series steel table legs designed for standard table-height work surfaces. Each leg is built from steel and provides a 2-3/8 inch diameter support, which spreads the load over a stable footprint for desks, tables, and workstations. The Hamburg Series design is rated at a 660 lbs per leg load bearing capacity, so a four-leg layout supports substantial work surfaces in commercial or shop settings. Each leg is set to a nominal 27-3/4 inch table height, helping match common work surface standards across projects. Built-in 1-1/8 inch adjustment in the feet lets you fine-tune height to respond to uneven floors or align adjacent tops. The chrome finish provides a clean, bright look that suits office, residential, and shop environments where visible hardware needs a finished appearance.

Key Camar Hamburg Table Leg Advantages

• The 660 lbs per leg load bearing capacity allows heavy work surfaces or equipment to be supported on each leg, which is important for tables that see high static loads in shop or office use.
• The 2-3/8 inch diameter steel construction provides a solid vertical support column, helping reduce flex and movement under normal loading and creating a more rigid-feeling table.
• The standard 27-3/4 inch table height positions the work surface at a familiar level, which helps align with existing furniture and supports consistent ergonomics across multiple stations.
• The 1-1/8 inch adjustment built into the feet lets you raise or lower each corner, which simplifies leveling on irregular floors and helps align abutting tops with minimal rework.
• The chrome finish offers a bright metallic appearance that coordinates with contemporary interiors, which matters when legs are exposed under desks, conference tables, or workbenches.
• The availability of other leg lengths in the Hamburg Series - 34-1/4 inch counter height and 43 inch bar height - supports using similar styling across different surface heights in one project.

Mounting And Adjustment Details For Installation

Each Hamburg Series leg is connected to the work surface using separate brackets, giving a defined interface between the 2-3/8 inch diameter tube and the underside of the top. This bracketed connection focuses forces into a known footprint on the work surface, which helps with layout and repeatable placement across multiple tables. Screws secure the brackets to the table and the leg assembly, so the system creates a rigid joint that resists wobble. The 1-1/8 inch adjustable foot at the bottom of each leg provides fine tuning without modifying the work surface, which is especially useful when installing on concrete, tile, or older subfloors.

Using Hamburg Steel Table Legs In Real Projects

Where These Chrome Steel Table Legs Fit Best

The Camar Hamburg Series chrome legs fit projects that call for a standard table-height support with a clean tubular steel look. The 27-3/4 inch nominal height suits office desks, craft tables, shop benches, and general work surfaces where users expect a typical sitting height. Because each leg supports 660 lbs, these legs can carry solid-core tops, engineered panels, or laminated work surfaces common in woodworking and commercial millwork. The 2-3/8 inch diameter tube presents a substantial visual profile under larger tops, which can help proportion wide or deep surfaces. With the chrome finish, these legs align with environments where exposed metal components should coordinate with other chrome or brushed hardware. Within the Hamburg Series, the additional 34-1/4 inch and 43 inch options allow the same design language to continue into counter and bar-height installations.

Details That Support Repeatable Alignment And Setup

The combination of separate brackets and adjustable feet on the Hamburg Series is structured to support consistent results from one table to the next. The brackets provide a fixed mounting geometry between the leg and the underside of the work surface, which aids in creating repeatable layouts when building multiple units from the same plan. Screws secure both bracket and leg, so the connection remains stable once located, reducing the chance of movement after placement. At floor level, the 1-1/8 inch adjustment range in the foot lets installers dial in exact height and level without changing the top or cutting the tube, which is valuable when working in finished spaces. The 27-3/4 inch starting height combined with this adjustment means small variations in subfloor elevation can be absorbed at the foot, preserving a consistent finished work-surface height. Across workstations, this repeatability simplifies layout, reduces fitting time, and helps maintain even transitions between adjoining surfaces.

Common Questions About Camar 615-70-C1 Legs

Select Camar Hamburg Steel Table Legs With Confidence

The Camar Hamburg Series 615-70-C1 chrome legs pair 27-3/4 inch standard table height with 1-1/8 inch foot adjustment, giving practical control over finished work-surface level. The 2-3/8 inch diameter steel construction and 660 lbs per leg capacity support demanding work surfaces common in woodworking, office, and commercial projects. With separate brackets creating a defined connection to the work surface and a chrome finish suitable for visible installations, these legs align well with projects that need both structural performance and consistent appearance. For new builds or retrofits using the Hamburg Series system, choosing this model supports a coordinated look and predictable setup across multiple tables.