Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hamburg table leg from Camar is a steel table leg designed to support heavy work surfaces and tables. The leg has a 2-3/8 inch diameter, which spreads the load over a broad footprint so the table feels solid under working loads. The 27-3/4 inch length aligns to standard table height, helping build tables that match existing furniture and ergonomic expectations in shops, offices, or residential spaces. Each leg has a load bearing capacity of 660 lbs per leg, so a four-leg layout can carry substantial worktops or dense materials without overstressing the legs. The glossy black finish provides a clean, finished look on exposed applications, which matters on desks, conference tables, or utility tables where the leg is always visible. This leg belongs to Peter Meier's Hamburg Series, giving installers a consistent product family for coordinated table projects.
The Camar steel table leg is supplied with a separate bracket to attach the leg to the table, so installers can fasten the bracket to the underside of the top and then secure the leg to that bracket for a repeatable mounting method. All necessary screws are provided, which keeps the mounting interface consistent with the manufacturer's design across jobs. Each leg has 1-1/8 inch adjustment built into the feet, allowing fine tuning of final height relative to uneven floors or adjacent cabinets. This built-in adjustment range lets installers dial in level and match heights between multiple tables or work surfaces without modifying the top or cutting the leg.
This 27-3/4 inch Hamburg table leg is suited to standard table height applications where a steel support is preferred under wood, laminate, or composite tops. The 2-3/8 inch diameter works well on work surfaces that need more than decorative support, such as shop tables, office workstations, or utility benches that carry equipment or stacked materials. The glossy black finish lets the leg blend with dark bases, black hardware, or black-framed furniture, which is useful when tying together mixed components in a room or shop layout. Because this leg is part of the Hamburg Series, it can be used alongside the counter height and bar height versions in the same series when a project requires multiple working levels that still look related.
The separate bracket supplied with the Hamburg table leg provides a defined interface between the leg and the underside of the top, so hole locations and fastener layout stay consistent across multiple tables or production runs. This helps installers repeat the same method on-site or in the shop, reducing layout time once a pattern is established. All necessary screws matched to the bracket and leg connection allow the fasteners to work with the specified steel components, supporting solid attachment when installed correctly. The 1-1/8 inch built-in adjustment at the feet lets installers compensate for floor variations while keeping the top at the intended 27-3/4 inch nominal height. This adjustment range also simplifies aligning several tables in a row, because each leg can be tuned independently instead of altering the top or shimming between components.
The Hamburg table leg is 27-3/4 inches high with a 2-3/8 inch diameter, which sets a standard table height and provides a broad support column for heavier tops.
Each Camar steel table leg in the Hamburg Series has a load bearing capacity of 660 lbs per leg, allowing use under substantial work surfaces or dense materials.
The Hamburg table leg has 1-1/8 inch adjustment built into the feet, which lets installers fine tune final height and level tables on uneven floors.
This 27-3/4 inch Hamburg table leg has a glossy black finish, giving exposed table bases a clean, dark appearance that coordinates with black hardware.
The manufacturer part number for this Hamburg Series leg is 615-7S-02, which identifies the 27-3/4 inch glossy black version for ordering consistency.
The Hamburg Series offers leg lengths of 27-3/4 inches for table height, 34-1/4 inches for counter height, and 43 inches for bar height to cover common surface levels.
This Hamburg table leg from Camar pairs a 27-3/4 inch table height with a 2-3/8 inch steel column and 660 lbs per leg capacity, giving strong support for work surfaces. The glossy black finish and 1-1/8 inch adjustable feet help align appearance and height across projects. For jobs needing a steel leg solution within the Hamburg Series family, this leg provides a defined size, finish, and load rating for repeatable results.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  CM660-00-60 Mfr# 660-00-60 | Modesty Panel Clips, Hardware Sets Clips Used to Attach Panels to Steel Legs, Black - 12 Each |
