Steel Table Legs, 1-1/8" Adjustment, 2-3/8" Diameter, Counter Top Height 34-1/4" Adjustable Foot, Brushed Steel - Single Pack

Steel Table Legs For Counter Height Work

Steel table legs define this Camar Hamburg Series counter height leg, giving a rigid base that supports demanding work surfaces in shops, offices, or residential settings where a solid feel is important. The 34-1/4 inch counter height adjustable foot design lets this leg match standard counter height runs, which helps align worktops in continuous installations. A 2-3/8 inch diameter steel tube spreads the load over a wider footprint, which matters when supporting heavier counters or concentrated loads. The built-in 1-1/8 inch adjustment at the feet allows fine-tuning of height, which helps compensate for uneven floors and align multiple legs under one top. A 660 lbs per leg load bearing capacity provides substantial support for dense materials or equipment, important for workbenches and counters that carry real weight. The brushed steel finish offers a clean, neutral look that fits many commercial and residential environments.

Key Hamburg Series Details For Daily Use

• The 660 lbs per leg load bearing capacity handles heavy work surfaces, so counters built with dense tops or equipment stay stable under typical working loads.
• The 2-3/8 inch diameter tubular design spreads force over more area, which reduces point stress at the mounting bracket and improves overall rigidity on sturdy tops.
• The 34-1/4 inch counter height length targets standard counter applications, so installers can match typical kitchen, shop, or service counter runs without custom fabrication.
• The 1-1/8 inch adjustment in the feet offers vertical fine-tuning, which helps align tops where floors vary slightly in height across a run or between rooms.
• The brushed steel finish gives a neutral metallic appearance, which coordinates with many hardware finishes and surface materials in mixed-use spaces.
• The Hamburg Series line identity signals a coordinated family of legs, valuable when a project mixes different counter lengths while keeping a consistent look.

Hamburg Series Leg Fit And Adjustment Details

The Hamburg Series counter height leg uses a steel construction with a 2-3/8 inch diameter, giving a consistent interface for mounting brackets that are sized to that tube. The 34-1/4 inch nominal length sets a predictable starting height for counter installations, which helps layout when planning cabinet and support spacing. The built-in 1-1/8 inch adjustable foot changes overall leg height, so installers can correct for floor variations without shimming under cabinets. This adjustment at the foot also helps dial in precise top alignment when tying into adjacent cabinetry or existing counters. A 660 lbs per leg load capacity supports substantial loads at this set height and adjustment range, so the same leg can serve both lighter laminate counters and heavier composite or solid tops.

Using Camar Hamburg Steel Legs In Projects

Where This Steel Table Leg Performs Best

The Camar Hamburg Series 34-1/4 inch leg is designed as a counter height support, which suits work surfaces, kitchen-style counters, and similar standing-height applications. Its 660 lbs per leg load capacity allows use under heavy-duty work surfaces where tools, equipment, or dense materials rest on the top. The 2-3/8 inch diameter profile gives a substantial presence under larger tops, useful on long counters that need visual and structural balance. With a brushed steel finish, the leg pairs well with neutral or metallic hardware schemes, fitting into many commercial, office, or workshop interiors. The dedicated counter height length means it can be repeated along a run of cabinets or freestanding counters, so multiple legs share the same baseline geometry. This consistent height and appearance help create uniform installations across larger spaces.

Details That Support Reliable Countertop Alignment

The 34-1/4 inch counter height dimension sets a clear reference height, which simplifies layout when matching leg-supported sections to adjacent casework. The built-in 1-1/8 inch adjustable foot allows incremental changes in leg height, so installers can fine-tune a run until the work surface is level. This adjustment works directly at the feet, which keeps corrections localized to each support point and avoids altering the counter structure. The 2-3/8 inch diameter steel construction resists flexing at typical spans, helping maintain alignment once the counter is set. A 660 lbs per leg rating means the leg continues to support alignment even under substantial working loads, reducing the risk of sagging over time under heavy use. The brushed steel finish maintains a consistent appearance around the adjustment area, so visible legs look unified even when individual feet are set at slightly different heights.

Common Questions About This Hamburg Series Leg

Select This Hamburg Leg For Counter Projects

This Camar Hamburg Series 34-1/4 inch steel table leg combines counter height geometry, a 2-3/8 inch diameter tube, and a 660 lbs per leg rating to support serious work surfaces. The built-in 1-1/8 inch adjustable foot lets installations reach level without altering cabinet or top construction. The brushed steel finish makes this leg suitable for both commercial and residential counters where exposed supports form part of the design. For counter height runs that need consistent alignment, substantial capacity, and a clean brushed steel look, this Hamburg Series leg is a focused solution.