2-3/8" Diameter x 27-3/4" High Hamburg Single Table Leg, Matte Black

Hamburg Single Table Leg For Work Surfaces

Hamburg single table leg is a steel table leg from Camar designed for work surfaces and tables where a single, load-bearing support is needed. This leg measures 27-3/4 inches high, giving a standard table-height solution that suits most work surface layouts needing comfortable seated access. The 2-3/8 inch diameter steel construction provides a substantial support column that resists flex in typical table applications. Each leg has a rated load-bearing capacity of 660 lbs per leg, allowing one leg to support heavy tops when used in combination with other structural supports. The matte black finish delivers a flat black look that visually ties into darker casework and hardware. Legs are part of Peter Meier's Hamburg Series, so multiple height options within the same visual family can be used on related projects for consistent appearance across table, counter, and bar height installations.

Key Hamburg Single Table Leg Advantages

• The leg height of 27-3/4 inches establishes a standard table-height work surface, which helps keep desk or table projects within familiar ergonomic ranges for seated tasks.
• The 2-3/8 inch diameter circular profile supplies a broad support footprint at the floor and underside connection, which helps distribute loads across the leg and the mounting area.
• The rated 660 lbs per leg load capacity allows the leg to handle substantial tops and work surfaces, which is important when supporting dense materials or heavier assemblies.
• The matte black finish delivers a flat black appearance that coordinates with flat black hardware, which helps maintain a consistent visual theme in contemporary or understated installations.
• The leg provides 1-1/8 inches of adjustment through the built-in feet, which helps fine-tune final height when compensating for minor floor irregularities or aligning with adjacent cabinetry.

Installation And Height Adjustment Details

The Hamburg single table leg uses a separate bracket to attach the leg to the table, creating a defined connection point between the steel tube and the underside of the top. This bracket-based approach focuses the mounting load into a dedicated interface, which supports a solid feel at the corner or intermediate support location. Built-in feet with 1-1/8 inches of adjustment allow the installer to raise or lower the bottom of the leg slightly, which helps bring multiple legs into the same plane under one top. That adjustment range also supports leveling when a floor is out of plane, so the table top can be set flat while each foot meets the surface firmly.

Using This Camar Table Leg In Real Projects

Where The 27-3/4 Inch Matte Black Leg Fits

This Hamburg single table leg at 27-3/4 inches height fits applications where a standard table-height work surface is needed, such as desks, work tables, or task stations. The matte black finish aligns with flat black hardware and components, which supports cohesive design in projects that use dark pulls, hinges, or frame elements. Because it is part of Peter Meier's Hamburg Series, the leg can be used alongside other heights from the same series, allowing table-height surfaces to visually coordinate with counter-height or bar-height elements. The 2-3/8 inch diameter gives the leg a substantial presence under larger tops, which visually balances thicker or wider work surfaces in offices, shops, or residential spaces.

Details That Support Alignment And Load Capacity

The Hamburg series steel construction with a 2-3/8 inch diameter tube provides the structural backbone for the 660 lbs per leg load rating, giving confidence when using heavier tops or dense work surfaces. The separate bracket connection supports accurate placement of each leg relative to edges and corners, which helps align multiple legs around one top so they share the load evenly. Built-in feet with 1-1/8 inches of adjustment make it possible to dial in final height after the top is mounted, which is useful when matching an adjacent cabinet run or another existing work surface. The availability of five finishes - Gloss Black, Flat Black, Chrome, Brushed Steel, and White - means the same structural format can be matched to different visual programs while still retaining the same height, diameter, and load characteristics for consistent performance across multiple installations.

Common Questions About This Hamburg Table Leg

Selecting This Hamburg Leg For Your Next Table

The Hamburg single table leg in matte black combines 27-3/4 inch table height, a 2-3/8 inch steel diameter, and a 660 lbs per leg capacity to support serious work surfaces. The separate bracket connection and 1-1/8 inch adjustable feet streamline leveling and alignment in the field. With multiple finishes in the Hamburg series and consistent dimensions, projects can standardize on this format across table, counter, and bar height solutions. For table-height runs that need both capacity and straightforward adjustment, this Camar Hamburg leg offers a focused, job-ready option.