Steel Table Legs, 1-1/8" Adjustment, 2-3/8" Diameter, Bar Height 43" Adjustable Foot, Gloss Black - Single Pack

Steel Table Legs For Bar Height Surfaces

Steel table legs define this Camar Hamburg Series bar-height support, giving installers a robust steel-based option for bar tops and elevated work surfaces. This leg is specified at 43 inches bar height, so it suits bar-height applications where a consistent working or seating level is required. The 2-3/8 inch diameter steel tube provides a substantial footprint, which helps distribute load into the floor and mounting surface. Each leg is rated at 660 lbs load bearing capacity per leg, so a bank of legs can support heavy tops or dense materials without overstressing individual supports. The built-in 1-1/8 inch adjustment in the foot lets installers dial in final height within that range, which helps compensate for uneven floors and achieve level runs along longer counters. The gloss black finish brings a clean, uniform appearance that coordinates with many commercial and residential bar designs.

Key Hamburg Series Details That Aid Projects

• The Hamburg Series is a premium line of steel table legs, so every leg shares a consistent engineering approach that supports repeatable layouts across multiple installations.
• Each steel leg has a 2-3/8 inch diameter, which offers a broad contact profile to stabilize tall bar-height runs under heavy tops.
• The specified bar height of 43 inches matches common bar layouts, simplifying planning when aligning stools, counters, and adjacent fixtures.
• A load bearing capacity of 660 lbs per leg allows the leg to carry substantial weight, which is important when tops use thicker materials or extended overhangs.
• The 1-1/8 inch adjustment at the foot enables precise leveling over uneven floors, which reduces rocking and improves joint alignment across connected sections.

Bar Height Leg Setup And Adjustment Details

This 43 inch Camar Hamburg Series leg is configured with a built-in adjustable foot, giving 1-1/8 inch of vertical travel at the bottom of the leg. That integrated adjustment means the main steel tube remains fixed while final height is tuned at the floor contact point. For installers, this simplifies leveling long bar or counter runs, since multiple legs can be finely adjusted to bring the top into plane without shimming the structure. The 2-3/8 inch diameter dimension also aids layout, because leg centerlines can be planned with predictable edge offsets for visual alignment and knee clearance. The steel construction works well for bar height installations where vertical loads and lateral bumps are common, supporting long-term stability when legs are placed at recommended intervals under the surface.

Using This Camar Hamburg Leg In Real Builds

Where This 43 Inch Steel Leg Performs Best

The Hamburg Series steel table legs are positioned in the Work Surface & Tables category, so this 43 inch bar height leg is suited to elevated work surfaces and bar counters. Its 660 lbs per leg load capacity lets it support substantial bar tops, which is valuable in commercial settings with frequent use or dense surfacing materials. The 2-3/8 inch diameter offers a proportion that works visually under deeper tops while also giving enough footprint for stability. The gloss black finish presents a uniform appearance that can disappear under dark tops or stand out as a deliberate design element, depending on placement. Since Hamburg Series legs are available in table, counter, and bar heights, this bar-height version can be used alongside lower heights in the same line when projects step between work zones.

Why Dimensions, Finish, And Adjustment Support Results

The 43 inch bar height specification gives a defined starting point, so the 1-1/8 inch adjustable foot can be used to fine-tune the final working level without altering the structure. That adjustability is particularly useful on long runs where slight floor variations would otherwise telegraph as gaps or rocking at the top. The 2-3/8 inch diameter ties directly into layout decisions, since installers can position legs to balance load support and leg clearance while keeping a consistent reveal from the edge. The gloss black finish is one of five available finishes in the Hamburg Series, which allows this gloss black option to match jobs calling for a reflective, dark support under various top colors. Tying these details together, the steel construction, defined bar height, adjustment range, and finish all support a predictable, repeatable result across multiple installations using the same part number 615-1S-02.

Common Questions About Camar Hamburg Bar Legs

Select This Hamburg Leg For Bar Height Projects

This Camar Hamburg Series 43 inch bar-height steel leg with gloss black finish, 2-3/8 inch diameter, and 1-1/8 inch adjustable foot offers a defined, repeatable solution for bar-height work surfaces. With a 660 lbs per leg load capacity and part number 615-1S-02, it aligns well with projects that demand both substantial support and precise leveling. For bar counters, elevated work zones, or similar installations using steel table legs, this Hamburg Series leg provides a consistent specification that fits into planning, layout, and execution across multiple jobs.