Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Extent edge pull is a tab-style cabinet handle designed to give doors and drawers a streamlined look while providing a solid gripping point. The pull uses a 6-9/16 in (167 mm) center-to-center hole spacing, which sets the mounting points at a practical distance for full four-finger grip and stable drawer operation. Its overall length of 9-3/4 in extends beyond the mounting centers, so the pull visually anchors wider fronts and helps align multiple fronts along a run. A 1-5/8 in projection stands the pull off the surface enough for fingers to hook comfortably, supporting repeat use on busy cabinet banks. The 13/16 in width keeps the tab profile slim, so it reads modern while still covering the edge area where hands contact the front.
The 6-9/16 in (167 mm) center-to-center measurement dictates where mounting holes are drilled, so installers can lay out consistent spacing along a full cabinet run. With a 9-3/4 in overall length, there is material beyond each mounting point, which helps the pull visually bridge panel joints and maintain straight sightlines between adjacent fronts. The 13/16 in width concentrates the pull along the edge, keeping it close to the working corner where hands naturally reach. Combined with the 1-5/8 in projection, these dimensions create a predictable grip zone, which supports smooth opening and closing when doors and drawers are heavily loaded.
This Amerock Extent edge pull sits in the Decorative Hardware & Moldings category under Handles and Pulls, so it is suited to cabinet doors and drawers that need both function and a defined design statement. The tab-style geometry combined with its 13/16 in width makes it well suited to door and drawer fronts where a low-profile, edge-mounted handle is preferred over a protruding knob. The aluminum construction supports use on both small doors and larger drawers, because the lighter material adds minimal load to hinges and slides. The black chrome finish helps the pull visually integrate with contemporary casework, so banks of cabinets, vanities, or built-ins can carry the same look. Using the 6-9/16 in (167 mm) center-to-center layout across a project allows wide and narrow fronts to share the same pull position, which helps keep lines straight from one cabinet section to the next.
The 6-9/16 in (167 mm) center-to-center dimension gives installers a clear reference for drilling jigs or templates, which speeds up repetitive mounting on multiple fronts. The 9-3/4 in overall length means the pull overhangs the mounting holes at both ends, offering slight tolerance visually if fronts vary within normal shop margins. A 1-5/8 in projection and 13/16 in width together define a consistent grip profile, so doors and drawers feel the same in hand across the project. The Amerock BP36752BCR part number ties these dimensions, the Extent collection identity, the aluminum material, and the black chrome finish to one specific pull, which helps match existing hardware when expanding cabinetry or replacing damaged pieces later.
The Amerock Extent edge pull has a 6-9/16 in (167 mm) center-to-center size, so drill holes at that spacing to align the mounting points across cabinet doors or drawers.
The Amerock BP36752BCR pull measures 9-3/4 in in overall length, giving extra handle length beyond the mounting holes for a balanced look on wider fronts.
The Extent tab pull is made from aluminum, which keeps hardware weight low while providing a firm feel when opening doors or drawers repeatedly.
The Amerock Extent edge pull has a 1-5/8 in projection, creating room for fingers to hook behind the pull for a comfortable grip on doors and drawers.
The pull is 13/16 in wide, concentrating the grip along the cabinet edge so it stays slim while still covering the main touch area on the front.
This Extent pull uses a black chrome finish, giving a dark reflective surface that coordinates well with contemporary cabinet styles and contrasts lighter fronts.
The Amerock Extent edge pull in black chrome pairs a 6-9/16 in (167 mm) center-to-center layout with a 9-3/4 in overall length, giving projects a repeatable drilling pattern and a visually balanced handle span. Its aluminum construction and 1-5/8 in projection support comfortable daily operation on both doors and drawers. The 13/16 in width and Extent collection styling help carry the same modern tab profile across a full run of cabinets, so fronts line up cleanly. Use this part number BP36752BCR when selecting hardware to match existing Amerock Extent installations or to establish a defined look on new casework.
Sold In: 1 Each
