Amerock Kamari Cabinet Pull 96mm For Cabinets

Amerock Kamari cabinet pull 96mm delivers a defined 3-3/4 in (96 mm) center-to-center mounting span, giving installers a predictable drill layout for cabinet doors and drawers. The pull length of 4-15/16 in (125 mm) provides hand clearance across standard face frames, supporting comfortable everyday use in kitchens or shops. A projection of 1 in (25 mm) sets the grip off the surface at a consistent distance, which helps fingers catch the pull cleanly without contacting the cabinet face. The 1-3/16 in (30 mm) width creates a stable gripping surface along the scalloped profile, helping users open heavier drawers with a firm hold. Made from zinc, the pull offers a solid metal feel that suits frequent opening and closing in active workspaces. The Golden Champagne finish ties into the Kamari collection design, giving projects a coordinated modern look from one Amerock Corporation source.

Kamari Pull Details That Support Daily Use

• The 3-3/4 in (96 mm) center-to-center dimension sets a standard mounting pattern, which simplifies layout when lining up multiple pulls across cabinet runs or drawer banks.
• The 4-15/16 in (125 mm) overall length spans a wider portion of the drawer front, helping distribute pulling force and supporting a balanced open-and-close motion on larger fronts.
• The 1 in (25 mm) projection spaces the hand away from the cabinet face, reducing knuckle contact and providing room for fingertips when mounted near adjacent doors or walls.
• The 1-3/16 in (30 mm) width and scalloped surface from the Kamari collection create a defined grip area, aiding control when opening heavier drawers or frequently used cabinets.
• The 3/8 in (10 mm) base diameter defines a compact footprint at each mounting point, which helps the pull sit cleanly on the surface and match tight design lines on modern cabinetry.
• The Golden Champagne finish from the Kamari collection establishes a consistent visual across cabinets and drawers, supporting cohesive hardware layouts on multi-room projects.

Amerock Kamari Pull Mounting And Fit Details

The specified 3-3/4 in (96 mm) center-to-center spacing on this Amerock Kamari 3-3/4 inch pull sets clear hole locations, which helps installers drill repetitive patterns across multiple cabinet fronts. With a 4-15/16 in (125 mm) length, the pull covers the span between holes while leaving visible edge clearance on standard door and drawer sizes. The 1 in (25 mm) projection defines how far the pull stands off the surface, which is useful when planning clearance near adjacent components or trim. A 1-3/16 in (30 mm) width and 3/8 in (10 mm) base diameter describe the footprint that contacts the cabinet face, supporting planning for overlays or narrow rails. The 8-32 x 1 in screw size specification ties the pull to a common threaded fastener standard, which aligns with many cabinet construction practices in the woodworking industry.

Where Kamari Collection Pull BP36822BBZ Works Best

Installation Uses For Kamari Scalloped Surface Pull

The Kamari collection description notes inspiration from sand patterns on exotic volcanic beaches, and that scalloped surface design on pull BP36822BBZ provides a textured profile that the hand can register quickly. On cabinet doors and drawers, this surface shape gives users tactile feedback when grabbing the pull, helping guide the fingers into position without looking. The defined 3-3/4 in (96 mm) center-to-center mounting dimension fits projects built around that common spread, supporting use on both new cabinetry and work where that spacing is already drilled. In shop or residential layouts, the 4-15/16 in (125 mm) length and 1-3/16 in (30 mm) width give enough bar area for a four-finger grip, which is practical for wide, loaded drawers. The Golden Champagne finish visually ties the pull into the broader Kamari collection, helping installers repeat the same look across multiple rooms while using the same manufacturer part number BP36822BBZ.

Details That Support Alignment And Repeatable Results

The Amerock Kamari cabinet pull 96mm uses a consistent 3-3/4 in (96 mm) center-to-center specification, which supports jig-based drilling and keeps hardware rows aligned from door to door. Knowing the projection is set at 1 in (25 mm) allows planners to map door swing and clearance, especially where doors meet appliances, walls, or adjacent cabinets. The 3/8 in (10 mm) base diameter at each end gives a precise reference circle that helps position layout marks relative to panel edges or rails. With a total length of 4-15/16 in (125 mm), installers can center the pull on standard drawer widths while keeping a predictable reveal around the hardware. The zinc material description defines the pull body as a metal component, which helps it integrate with other metal decorative hardware & moldings selected from Amerock Corporation. Together, these defined dimensions and materials support repeatable positioning across large installations and multi-unit projects.

Common Questions About This Amerock Kamari Pull

Selecting This Kamari Pull For Your Project

The Amerock Kamari cabinet pull 96mm pairs a defined 3-3/4 in (96 mm) center-to-center layout with a 4-15/16 in (125 mm) length, giving a clear fit for many cabinet and drawer fronts. With zinc construction and a Golden Champagne finish from the Kamari collection, the pull ties into Amerock decorative hardware & moldings while providing a consistent look across projects. When a project calls for a scalloped surface profile and a known 1 in (25 mm) projection, BP36822BBZ offers a precise set of dimensions for planning hole spacing, grip clearance, and visual alignment.