Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt installation screws give you a matched fastener for KV70 and KV80 series standards, so the standards stay aligned and secure in service. These screws are 1-1/2 inch long, which lets them bite firmly into typical wall materials behind closet or garage organizers. Each screw has a #8 body, so it fills the pilot hole solidly and resists wobble during drive-in. The #6 Phillips head on each screw sits smaller than the body, helping the flat head seat neatly in the standard hole. The flat head profile lets the screw sit flush to the standard, so brackets can engage the slots without interference. The brass finish option matches brass-finished standards, so exposed fasteners blend with the hardware instead of standing out on the run.
The KV Model KV80-80 screw is designated for use with KV70 and KV80 series standards, giving installers a part that aligns with the hole pattern and thickness of these standards. The #8 body size pairs with a #6 head, so the shank grips firmly while the smaller head nests into the standard openings. The Phillips drive style works with common jobsite bits, keeping tool changes minimal while laying out long vertical runs. With a 1-1/2 inch length, these screws reach through the standard and drywall into backing or anchors, supporting typical closet and garage organizer loads when standards are spaced correctly. The brass finish supports visible runs where hardware appearance needs to match brass-color standards along the wall.
KV Model KV80-80 screws are specified for use with KV70 and KV80 series standards, so they match the standard thickness and hole sizing used in shelf, closet, and garage organization systems. In these applications, the #8 body diameter delivers a solid hold when driven into framing lumber or appropriate anchors behind finished walls. The 1-1/2 inch length provides enough reach to pass through the standard, drywall, and into backing, which is important when standards carry adjustable brackets and shelving. The flat head design lets the screw sit flush against the standard face, helping bracket clips and standard slots line up cleanly along the full height. The brass finish can be used where exposed fasteners are visible, such as open closet runs or storage walls using brass-toned standards.
The combination of a #8 body and #6 Phillips head on each screw helps balance holding power with clean seating in the standard holes, which supports straight, repeatable standard runs. The Phillips drive engages with common bits, so installers can maintain steady torque without special tooling while working overhead or near corners. The 1-1/2 inch length means each screw engages more material behind the wall surface, which supports consistent pull-out resistance across a row of standards. The flat head profile reduces proud heads that could interfere with bracket hooks, which helps shelves sit level from bracket to bracket. With a brass finish option, installers can match the screw heads to brass-finished standards, maintaining a uniform appearance across multiple bays of shelving.
KV80-80 brass screws are for use with KV70 and KV80 series standards, so the screw sizing and head shape match the shelf standards used in these systems.
The 1-1/2 inch length lets each screw pass through the standard and wall surface into backing or anchors, supporting shelf loads in typical closet or garage installations.
The #8 body gives stronger thread engagement in wood or anchors, while the smaller #6 flat head seats neatly in the standard holes for a flush fit.
Flat head Phillips screws sit flush against the standard and work with common drivers, supporting clean bracket engagement and straightforward installation runs.
The brass finish coordinates with brass-colored standards, so exposed screw heads blend into visible closet or storage installations using brass hardware.
The KV80-80 model designation ties these screws directly to KV shelf standard systems, helping align screw choice with KV70 and KV80 series standards.
Choose KV Model KV80-80 brass flat head Phillips screws when working with KV70 or KV80 series standards and needing a 1-1/2 inch #8 body fastener. The matched dimensions and finish help shelf standards mount securely while keeping visible hardware consistent across the installation.
Sold In: 50 Each
