Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Multi-Color Installation Screws flat head Phillips drive #8 gauge, 1-1/2 inch length, black are designed for installers working with Knape and Vogt shelf standards and brackets. The KV Model KV80-80 designation ties these screws directly to the KV70 and KV80 series standards, so the sizing and geometry are set up for that family of hardware in closet and shelving projects. Each screw uses a Phillips drive, which matches common jobsite drivers and helps keep bit changes simple during repetitive shelf standard runs. The screw body is #8 gauge, giving it a shank size suited to typical wall and stud mounting for standards. The head is sized as a #6, so it seats properly into the standard holes without overhanging. The 1-1/2 inch length provides reach through standards and into substrate. The black finish option supports visual alignment with black KV standards in exposed closet or garage layouts.
The #8 gauge body on these Knape and Vogt KV80-80 screws gives the installer a robust shank for mounting KV70 and KV80 series standards. The combination of a #6 head on a #8 body means the head nests more tightly into the standard slots, which helps the standard sit closer to the wall or mounting surface. With a 1-1/2 inch length, the screw reaches comfortably through typical steel standards into the backing material, so the thread engagement happens beyond the hardware instead of at its face. The flat head profile is suited for countersunk or punched slots in standards, so the hardware bears directly on the wall surface. Because the drive style is Phillips, a standard Phillips driver bit works with these screws, which aligns with typical installation tools used in closet and shelving work.
The SAP description SCREW PAK, 80AE,EB and STB and the web description link these screws to KV70 and KV80 series standards, so they are oriented to installations using Knape and Vogt shelf standards and brackets. In a shelf or closet layout using those standards, these 1-1/2 inch #8 body screws serve as the fastener tying each standard to the mounting surface. The #6 head size corresponds to the geometry of KV shelf standards, so the screw head nests into the slot or hole while leaving the standard face relatively unobstructed. The black finish option gives a color alignment for projects using black standards, so the screw head does not visually contrast sharply with the hardware in exposed storage or garage applications. For installers building runs of standards for adjustable shelving, this direct tie between screw design and standard series places these screws in the primary fastening role for that system.
Because each screw is 1-1/2 inches long with a #8 body, the fastener geometry is consistent across every hole in a KV70 or KV80 standard, supporting repeatable load transfer into the substrate along the run. The #6 head on a #8 body offers a controlled bearing area inside the standard slot, helping the standard come tight against the wall while keeping the head from crowding adjustment paths for brackets. The flat head Phillips drive profile means that once the screw is driven, the head presents a flat bearing surface at the standard, reducing rocking at that attachment point. The Phillips drive lets installers use widely available bits without changing drivers between fasteners on the same wall, which can streamline repetitive installation of multiple standards. The availability of almond, anochrome, black, and brass finishes means the screw head color can be chosen to align with the finish of the Knape and Vogt hardware line used on the project, supporting a consistent hardware appearance.
The Knape and Vogt KV80-80 screws are described for use with KV70 and KV80 series standards, so their sizing and head design are aligned with the mounting holes on those standards.
The KV80-80 screws use a #8 body for shank strength with a #6 head, so the head fits the standard slots while the shank carries the fastening load into the mounting surface.
The 1-1/2 inch length allows each KV80-80 screw to pass through the shelf standard and engage the underlying substrate, supporting a more secure attachment in shelf runs.
The KV80-80 screws use a Phillips drive, which works with standard Phillips bits commonly carried by installers and supports straightforward driving along standard runs.
The KV80-80 screws are available in almond, anochrome, black, and brass finishes, allowing the screw head color to align with matching Knape and Vogt hardware finishes.
The KV80-80 screws are listed under shelf standards and brackets and are described for use with KV70 and KV80 series standards in shelf, closet, and garage organization layouts.
The Knape and Vogt 80-80 BLK screw pack is configured around the KV Model KV80-80, tying directly to KV70 and KV80 series standards in shelf, closet, and garage organization work. With a #8 body, #6 head, 1-1/2 inch length, Phillips drive, and multiple finish options including black, these screws are shaped for that standard system. For projects built around Knape and Vogt shelf standards and brackets, choosing this screw format keeps the fastener geometry consistent with the hardware design and supports clean-looking, aligned standard runs.
Sold In: 50 Each
