Knape And Vogt 12 Inch Drawer Slides For Full Access

Knape and Vogt 12 inch drawer slides give a full extension travel, so the drawer moves out to the slide length and exposes the storage space for easier access during cabinet work. The slide is part of the KV Model 8400 Series, which identifies it as a side mount ball bearing slide suited to side mounting in cabinetry where that layout is planned. The slide uses ball bearing construction, so the drawer rides on ball bearings that carry the load along the members and support smooth motion in use. A hold-in anti-rebound function is identified in the product name, showing that the slide is designed to resist rolling back out once closed, which matters when drawers are used repeatedly. The slide is non-handed, so the same component type can be mounted on either side, which simplifies installation planning and stocking.

Key 8400P 12 Features That Support Installers

• Full extension travel lets the drawer move out to the 12 inch slide length, which exposes the drawer contents and helps during hardware adjustments and cabinet access.
• Side mount drawer slide classification defines that the slide mounts to the cabinet side, which supports layouts already designed for side mounting in woodworking projects.
• Ball bearing drawer slide design means the members move on ball bearings, which supports smooth drawer operation and consistent feel once the cabinet is in service.
• Non-handed configuration allows the same slide type to be installed on left or right sides, which simplifies part selection and reduces layout complexity during assembly.
• Lever disconnect feature gives a defined mechanism to separate the drawer member from the cabinet member, which helps during drawer removal, fitting, and later adjustments.
• Ball retainer latch feature helps retain the ball bearings in position inside the slide, which supports reliable movement while the drawer is cycled over time.

Side Mount Installation And Slide Fit Details

The Knape and Vogt 8400P 12 slide is specified as a side mount drawer slide, so the slide members fasten along the cabinet sides where side-mount construction is used. The manufacturer lists a side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, defining the gap needed between the drawer side and cabinet side for proper fit. The slide height is 1-13/16 inch, which defines the vertical space the slide occupies and factors into the drawer side design. The recommended fasteners are #7 x 1/2 inch Phillips truss head screws, which aligns the hole sizing and head style on the slide members with that screw specification for mounting.

Using 8400 Series Slides In Cabinet Projects

Where The 8400P 12 Drawer Slide Works Best

The Knape and Vogt 8400P 12 full extension ball bearing slide fits cabinet projects that are designed for a 12 inch side mount slide length, because the drawer travel will match that 12 inch dimension. The side clearance requirement of 1/2 inch plus 1/32 inch minus 0 inch on each side directly drives the drawer box sizing, so casework built to that gap will allow the slide to run as intended. The 1-13/16 inch slide height defines how tall the drawer side can be before conflicting with the slide profile, so planning that dimension keeps the movement unobstructed. The side mount drawer slide product class signals that the slide attaches to the cabinet sides instead of the bottom, which matches standard side-mount carcass construction. The non-handed design means a single slide type can serve both left and right sides of a drawer, reducing the chance of mixing parts during assembly on site or in the shop.

Details That Support Repeatable Drawer Performance

The full extension feature on the KV Model 8400 Series slide lets the drawer travel the full 12 inch length of the member, which brings the back of the drawer forward and simplifies loading and viewing contents once the cabinet is installed. The ball bearing construction supports controlled movement between the cabinet member and drawer member, which contributes to consistent operation each time the drawer is opened and closed. The lever disconnect feature provides a built-in method to separate the drawer member from the cabinet member, which is useful when fitting drawer fronts, finishing interiors, or servicing the cabinet later. The ball retainer latch feature is designed to retain the bearing set within the slide, which helps keep the motion path stable as the drawer cycles. The anochrome finish is identified as the surface treatment, which presents a uniform metallic appearance on the slide and relates to how the hardware looks when the drawer is extended. The non-handed configuration of the slide supports straightforward replacement or additional drawer installations, because the same slide form can be used on either side without separate left and right codes.

Common 8400P 12 Drawer Slide Buyer Questions

Selecting This 12 Inch Slide For Your Project

The Knape and Vogt 8400P 12 full extension slide combines side mount installation, ball bearing construction, and a defined 1/2 inch plus 1/32 inch minus 0 inch side clearance, so it fits projects laid out for that gap and travel. The 1-13/16 inch height and anochrome finish define its profile and appearance when the drawer is open, connecting the hardware choice to both fit and look. With a non-handed design and lever disconnect feature, the slide suits shop production or on-site cabinet builds that use 12 inch side mount ball bearing drawer slides from the 8400 Series.