Knape and Vogt 26 Inch Drawer Slides For Full Access

Knape and Vogt 26 inch drawer slides deliver full extension, so the drawer travels the full slide length and exposes stored contents for easier access in cabinet and woodworking projects. The slides are part of the 8400 Series, which identifies them as side mount drawer slides designed for projects needing this style. A hold-in anti-rebound design works with the ball bearing action to keep the drawer more controlled at the end of travel, which matters when drawers are frequently opened and closed. The ball bearing construction supports smooth movement along the travel path. An anochrome finish coats the slides, which provides a uniform surface that fits typical cabinet hardware layouts. The slides are non-handed, so each member can be used on either side, which simplifies layout when setting up for installation.

Key 8400P 26 Details That Support Installers

• Side clearance of 1/2 inch plus 1/32 inch and minus 0 inch on each side defines the required gap between drawer and cabinet, which guides sizing during construction or retrofit work.
• A height of 1-13/16 inch sets the vertical profile of the slide on the drawer side, which helps with planning stack spacing in multi-drawer cabinets.
• The 32 mm pattern is present, so the mounting holes relate to common 32 mm system layouts, helping align the slide with line-bored cabinet sides in production shops.
• Lever disconnect is built into the slides, allowing the drawer member to be separated from the cabinet member for installation or service, which can simplify handling larger or heavier drawers.
• The ball retainer latch is part of the slide design, helping keep the ball bearings positioned within the raceway, which supports smooth running over the slide life.
• Non-handed construction means the same slide members work on either side, which reduces orientation questions during installation and helps with stocking a single part.
• Anochrome finish on the slides provides a consistent metallic appearance that coordinates with typical cabinet hardware, which matters in exposed installations.

Side Mount Installation And Fastener Guidance

The KV Model #8400 26 inch length side mount design places the slides on the drawer sides and cabinet sides, which follows standard side mount drawer construction. Side clearance of 1/2 inch plus 1/32 inch and minus 0 inch on each side defines the needed spacing between the drawer and cabinet opening, which is important for smooth travel without binding. A 32 mm pattern gives hole locations that match 32 mm system drilling, which supports using line-bored cabinet parts in a production setting. Recommended fasteners are #7 x 1/2 inch Phillips truss head screws, providing a head style suited to the slide mounting holes and a length aligned with typical cabinet side thicknesses.

Using 8400 Series Slides In Cabinet Projects

Where 8400 Series Drawer Slides Fit Best

The Knape and Vogt 8400 Series side mount ball bearing drawer slides fit cabinet projects where a 26 inch full extension slide is needed and side mounting is preferred. With side clearance of 1/2 inch plus 1/32 inch and minus 0 inch on each side, the slides match openings built around that gap, which helps drawers track properly along their length. A height of 1-13/16 inch defines the vertical footprint on the drawer side, which is useful when stacking multiple drawers and needing predictable spacing between them. The 32 mm pattern supports use in cabinets drilled on the 32 mm system, so the slides can align with pre-drilled holes in case sides, benefiting shops using that construction method.

Details That Support Smooth Operation And Serviceability

The full extension design of the 26 inch 8400P 26 slides allows drawers to open along the full slide length, which provides visibility and access to items stored at the rear of the drawer. Ball bearing construction supports smooth movement over the travel, which matters when drawers are opened many times per day. The hold-in anti-rebound function works with the slide action to help retain the drawer at the closed position, which can reduce the tendency for a lightly loaded drawer to drift. A ball retainer latch is built into the slide, helping keep the bearings in place within the raceway so the motion stays consistent. Lever disconnect allows the drawer member to be released from the cabinet member, which can simplify fitting the drawer, transporting assembled cabinets, or performing later adjustments. Non-handed construction means the same slide components install on left or right sides, which streamlines setup and reduces handling time during installation runs.

Common Questions About 8400P 26 Installation

Selecting This 26 Inch Slide For Your Project

The Knape and Vogt 26 inch drawer slides with full extension, side mount configuration, and 1/2 inch plus 1/32 inch and minus 0 inch side clearance give clear parameters for cabinet and drawer sizing. A 1-13/16 inch height and 32 mm pattern define how the slide fits into casework using system drilling or traditional layouts. Lever disconnect, ball bearing action, and non-handed construction support straightforward installation and service. For projects calling for a 26 inch 8400 Series side mount drawer slide with anochrome finish, this 8400P 26 model aligns with those requirements.