Larsen and Shaw bright nickel piano hinge 2 x 12

Larsen And Shaw Bright Nickel Piano Hinge Details

Larsen and Shaw bright nickel piano hinge defines this 2 x 12 inch steel piano hinge as a continuous hinge solution for lids, doors, and panels where full-length support is required, so you spread the load along the entire edge instead of concentrating it at discrete points. The hinge is a piano hinge in the Hinges | Piano Hinges category, which positions it for projects where alignment along the whole opening matters, such as long cabinet doors or bench lids. The hinge is made from .060 gauge steel, giving it a substantial leaf thickness that helps resist flexing in normal cabinet and woodworking environments where repetitive opening and closing occurs. The finish is bright nickel, providing a clean, reflective appearance that works with other bright nickel hardware lines, so visible edges look consistent when the hinge is exposed in casework or furniture builds.

Key Piano Hinge Features For Shop Projects

• The hinge is a Larsen and Shaw high quality .060 gauge steel piano hinge, which gives you a sturdy continuous hinge line that supports doors and lids across their full length, useful when you want even movement and long-term alignment.
• The bright nickel finish on this steel piano hinge creates a smooth, reflective surface that visually matches other bright nickel components, helping finished cabinets and furniture maintain a unified hardware look when the hinge edge is visible.
• Hinge widths when opened are offered in 1-1/16, 1-1/4, 1-1/2, 2, and 3 inches, so you can select the leaf width that best fits your door thickness and stile or frame layout, managing overlay and reveal while keeping fasteners well supported.
• All cut lengths of these hinges have countersunk screw holes spaced 2 inches apart on center, setting a predictable fastener pattern that speeds layout, helps distribute load evenly, and supports consistent fastening into wood or other substrates.
• The hinges use flathead screws in #5 size for most widths and #6 for 3 inch-wide hinges, which matches common woodworking screw sizing and allows the heads to sink into the countersinks so the hinge knuckle can operate without interference.

Installation And Screw Pattern Details That Matter

All cut lengths of this Larsen and Shaw .060 gauge steel piano hinge carry countersunk screw holes on 2 inch centers, so you can mark and drill a repeating pattern along the door or lid edge without separate layout work. The fastener pattern is designed around #5 flathead screws for standard widths and #6 flathead screws for the 3 inch-wide hinge, which means the screw heads sit flush in the countersinks and allow the hinge to close cleanly. The 2 x 12 description identifies this specific piece as a 2 inch width by 12 inch length bright nickel hinge, giving you a defined segment suited to shorter lids, access panels, or compact cabinet applications where a full 72 inch strip is not required.

Using This Bright Nickel Piano Hinge In Builds

Where This Larsen And Shaw Piano Hinge Fits

This Larsen and Shaw bright nickel 2 x 12 inch steel piano hinge fits work where a continuous hinge line is preferred, such as small bench lids, cabinet doors, or access panels that benefit from support along the full edge. Being part of the Hinges | Piano Hinges category, it works within assemblies that already standardize on piano hinges, so knuckle appearance and movement feel familiar across a run of casework. The .060 gauge steel construction gives enough substance for doors and lids that see frequent use in shops, kitchens, or storage areas, helping the edge stay true so gaps remain consistent. The bright nickel finish lets this hinge sit comfortably alongside bright nickel pulls and knobs, which keeps the hardware palette uniform when the hinge line is visible on furniture or cabinetry projects.

Why Screw Pattern And Width Support Repeatable Results

The 2 inch on-center spacing of countersunk screw holes on this .060 gauge steel piano hinge gives you a fixed rhythm for fasteners, which helps installers repeat the same mounting approach project after project. Using #5 flathead screws on most hinge widths and #6 flathead screws on the 3 inch-wide version means the screw selection relates directly to the hinge size, supporting adequate bite in the substrate without oversizing the countersink. The available opened widths of 1-1/16, 1-1/4, 1-1/2, 2, and 3 inches let you match hinge leaf coverage to door thickness and frame depth, supporting layouts from light doors to wider frames using the same Larsen and Shaw system. This specific 2 x 12 inch bright nickel piano hinge ties into that width range, so when you standardize on this line you can shift between lengths and widths while keeping the same look and screw pattern for predictable results.

Common Questions About This Steel Piano Hinge

Selecting This Bright Nickel Piano Hinge For Jobs

This Larsen and Shaw bright nickel 2 x 12 inch .060 gauge steel piano hinge provides a defined length, a continuous hinge line, and a regular screw pattern on 2 inch centers, making layout straightforward on lids, cabinet doors, and access panels. The available width range from 1-1/16 through 3 inches across the Larsen and Shaw piano hinge family lets you align leaf coverage with your door and frame geometry while maintaining the same bright nickel look. Use this 1119GJ9NP piano hinge when a bright nickel continuous hinge matches your hardware palette and you want predictable fastening and movement along the entire edge.