Larsen and Shaw piano hinge in bright brass gives you a continuous 1-1/2 inch wide by 48 inch long pivot line, so lids, doors, or panels stay aligned along the full length instead of loading just two or three points. This piano hinge is built from .060 gauge steel, which provides a solid, stable knuckle for repeated opening and closing in typical woodworking and cabinet applications. The bright brass finish provides a specific visual match where brass hardware is required, helping keep visible hardware consistent across a run of cabinets or fixtures. This hinge sits in the piano hinge category, so it suits projects that need long, straight, continuous support rather than short butt hinges. The 48 inch length works well on many casework, bench, or storage applications where a full-span hinge keeps movement smooth and predictable.
This Larsen and Shaw bright brass piano hinge is drilled with countersunk holes on 2 inch centers along the length, so you can mark and drill a repeatable screw pattern on doors, lids, or frames without custom spacing. The manufacturer notes that 100 screws are required per 6 foot length, giving you a sense of how densely the hinge is fastened when planning shorter runs such as this 48 inch piece. All hinges in this line use #5 flathead screws except the 3 inch wide version, so this 1-1/2 inch hinge aligns with the #5 flathead standard that many installers already stock. The 1-1/2 inch opened width allows you to size your edge reveal and, where desired, lay out shallow mortises while still keeping enough leaf on both the door and the case.
This 1-1/2 inch by 48 inch Larsen and Shaw piano hinge fits projects that benefit from full-length support, such as cabinet doors, chest lids, long access panels, or bench seats that pivot. The .060 gauge steel construction keeps the hinge from feeling flimsy on longer spans, which helps maintain alignment over time across the full length of the opening. Because hinge widths in this series range from 1-1/16 inch to 3 inch opened, the 1-1/2 inch width sits in the mid-range, making it a practical choice when you want enough bearing surface without an oversized leaf. The bright brass finish works in applications where the hinge is visible and needs to coordinate with other brass-finished components in the same room or bank of cabinets.
The continuous countersunk screw pattern at 2 inch spacing along the Larsen and Shaw piano hinge gives you a built-in template that helps keep the hinge straight during installation, especially on long workpieces. Since the line specifies #5 flathead screws for all hinges except 3 inch wide versions, you get predictable screw head fit in the countersinks on this 1-1/2 inch model, which helps the leaves sit flush against wood or sheet material. The lifetime finish on these steel piano hinges is designed to maintain the bright brass appearance, helping finished jobs look consistent across multiple openings installed at different times. A 48 inch length is convenient for many standard cabinet and casework dimensions, which can reduce cutting and edge finishing work compared with starting from a longer strip. Across a run of cabinetry, combining the known leaf width, screw pattern, and finish helps you repeat the same setup and visual result from piece to piece.
The Larsen and Shaw piano hinge is 1-1/2 inches wide when opened and 48 inches long, which suits many cabinet doors, lids, and panels needing continuous support along that span.
This Larsen and Shaw piano hinge is .060 gauge steel, giving the leaves and knuckles enough thickness for solid feel and stable movement in typical woodworking applications.
This 1-1/2 inch Larsen and Shaw piano hinge is in the group that uses #5 flathead screws, so the countersunk holes are shaped for that screw head profile.
The piano hinge has countersunk screw holes spaced 2 inches apart on center, providing an even fastener pattern that helps keep the hinge straight and load distributed.
This Larsen and Shaw piano hinge has a bright brass finish described with a lifetime finish, supporting long-term appearance on visible cabinet or furniture projects.
In the same Larsen and Shaw series, hinge widths opened range from 1-1/16 inch to 3 inches and finishes include Antique Brass, Bright Brass, Bright Nickel, Black Powder Coat, and Bright Zinc.
The Larsen and Shaw bright brass 1-1/2 inch by 48 inch steel piano hinge gives you a defined combination of length, mid-range width, .060 gauge steel construction, and lifetime bright brass finish. The 2 inch on-center countersunk screw layout and #5 flathead screw callout let you work with a known pattern across multiple doors or lids. For projects that benefit from a continuous hinge line rather than separate butt hinges, this 1119EY9FB piano hinge offers a practical, repeatable choice that fits smoothly into cabinet, furniture, or general woodworking workflows.
Sold In: 1 Each
