Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Larsen and Shaw piano hinge in bright nickel gives a continuous steel pivot for projects that need even support along a 30 inch run, which helps doors or lids move smoothly without point loads on individual butt hinges. This piano hinge is a 1-1/2 inch x 30 inch steel piano hinge, so it suits layouts where a mid-size leaf width and a shorter cut length match typical cabinet, chest, or small door spans. The hinge is made from 0.060 gauge steel, providing a solid leaf thickness that helps the knuckle stay aligned under regular opening and closing cycles. A lifetime finish on these bright nickel piano hinges protects the surface appearance over long-term use, which matters on exposed cabinet edges or furniture pieces. As a Larsen and Shaw product, this piano hinge fits into jobs where consistent, repeatable hardware from the same line is preferred across a shop or project run.
This Larsen and Shaw piano hinge uses countersunk screw holes spaced 2 inches apart on center, giving a regular fastener pattern that helps distribute load along the full length. The hole design is intended for flathead screws, so the screw heads sit flush with the hinge leaf once driven, which keeps the barrel clearance clean during operation. All hinges in this line use #5 flathead screws, with the exception of 3 inch wide hinges that use #6 flathead screws, so this 1-1/2 inch wide hinge works with #5 flathead screws. That pairing supports a consistent bit and pilot routine when multiple hinges of similar width are installed on the same project. The hinge is sold without screws, which lets you select fasteners that match the substrate and interior or exterior environment of the installation.
This 1-1/2 inch x 30 inch Larsen and Shaw piano hinge fits projects needing a continuous hinge along a moderate span, such as smaller doors, lids, or panels where a 30 inch run is appropriate. The 1-1/2 inch opened width keeps the leaves compact, which suits face-frame cabinets, boxes, and furniture pieces where wide leaves might crowd adjacent components. Because hinge widths in this series are available in 1-1/16 inch, 1-1/4 inch, 1-1/2 inch, 2 inch, and 3 inch sizes, this model can align with a sizing strategy that balances leaf footprint and reveal. The bright nickel finish keeps the hinge visually aligned with other bright nickel hardware, which matters when the hinge line is exposed along the case edge. As part of Larsen and Shaw's piano hinge line, it sits within a catalog that covers multiple widths and finishes, helping a shop standardize around one manufacturer.
Larsen and Shaw's high quality 0.060 gauge steel piano hinges provide a consistent material thickness, which helps maintain knuckle geometry and pin alignment from hinge to hinge. All cut lengths of hinges have countersunk screw holes spaced 2 inches apart on center, so drilling and driving can follow the same pattern whether you are working with this 30 inch length or other cut sizes from the same line. The use of #5 flathead screws on this 1-1/2 inch wide hinge means the screw sizing remains predictable, streamlining tool and bit setups across multiple installations. Hinge widths (opened) in the series span 1-1/16 inch to 3 inch, so this 1-1/2 inch option lands in the middle of the range, providing a balance between bearing area on the substrate and a modest leaf footprint. Available finishes in the line include Antique Brass, Bright Brass, Bright Nickel, Black Powder Coat, and Bright Zinc, so this bright nickel version can match or contrast with other finishes as specified in the project design. The full box quantities for 30 inch lengths are 20 hinges per full box, which supports batch work where many identical openings receive the same hinge size.
The Larsen and Shaw bright nickel piano hinge 1119EY8NP is a 1-1/2 inch x 30 inch steel piano hinge, so it suits openings and panels designed around a 30 inch continuous pivot.
This Larsen and Shaw piano hinge is made from 0.060 gauge steel, giving a solid leaf thickness that supports stable knuckles and predictable movement under normal cabinet and furniture use.
This 1-1/2 inch wide Larsen and Shaw piano hinge uses #5 flathead screws, so the countersunk holes and screw heads align correctly to keep the hinge surface flush.
All cut lengths of these Larsen and Shaw piano hinges have countersunk screw holes spaced 2 inches apart on center, which supports even load transfer and a straightforward drilling layout.
This piano hinge has a bright nickel lifetime finish, so the surface appearance remains consistent over time and coordinates with other bright nickel hardware on the project.
This hinge is a 1-1/2 inch wide, 30 inch long bright nickel model within Larsen and Shaw's steel piano hinge series, matching the line's gauges, finishes, and hole patterns.
The Larsen and Shaw piano hinge in bright nickel pairs a 1-1/2 inch width with a 30 inch length, which suits many cabinet and furniture openings that benefit from continuous support. The 0.060 gauge steel construction and lifetime bright nickel finish provide a dependable hinge line that maintains alignment and appearance across regular use. With countersunk screw holes spaced 2 inches on center for #5 flathead screws, this hinge supports efficient, repeatable installation patterns on shop or site work. For woodworking projects where a continuous, mid-width steel piano hinge aligns with the design and fastener plan, this Larsen and Shaw bright nickel piano hinge offers a precise, consistent option.
Sold In: 1 Each
