Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Larsen and Shaw piano hinge in bright brass finish provides a continuous hinge line over a 72 inch run, which helps distribute door or lid loads more evenly along the full length of the opening. The hinge is a steel piano hinge, giving a solid metal structure that supports repeated opening and closing in cabinetry and similar woodwork. The .060 gauge steel leaf thickness creates a substantial hinge leaf that resists flexing under normal cabinet door or panel use. An opened width of 1-1/2 inches allows this hinge to sit neatly on the edge of doors, lids, or panels where a relatively narrow but continuous hinge is preferred. The hinge length of 72 inches suits tall cabinet doors or long lids where cutting a full-length hinge to size can streamline layout and installation on the job.
This Larsen and Shaw bright brass 1-1/2 x 72 steel piano hinge uses countersunk screw holes spaced 2 inches apart on center, which creates a predictable fastener layout that speeds marking and drilling. The hinge is designed for #5 flathead screws, so the screw heads sit flush in the countersinks and allow the hinge leaves to close fully without interference at the fastener locations. With 100 screws required per 6 foot length of hinge, the fastening pattern delivers dense attachment along the door or panel edge, which helps control alignment and reduces the tendency for the hinge leaf to pull away under load. The combination of a 1-1/2 inch opened width and continuous screw pattern supports accurate hinge positioning on narrow door stiles and cabinet carcasses.
This 1-1/2 inch wide, 72 inch long Larsen and Shaw piano hinge works well on tall doors or lids where continuous support is preferred over spaced butt hinges, because the full-length leaf spreads stresses along the entire edge. The bright brass finish matches applications that use bright brass decorative hardware, which keeps visible hinge lines consistent with knobs, pulls, or other brass-colored components. Because the hinge is a .060 gauge steel piano hinge, it is suitable for cabinetry, casework, or furniture-grade projects that call for a sturdy continuous hinge rather than a light decorative strip. Hinge widths in the line are available in 1-1/16, 1-1/4, 1-1/2, 2, and 3 inches opened, so this 1-1/2 inch width sits in the midrange where door edges are not overly thick yet still benefit from a stable bearing surface.
All cut lengths of these Larsen and Shaw piano hinges use countersunk screw holes on 2 inch centers, which simplifies repeating the same drilling pattern across multiple cabinets or doors in a run. The consistent requirement of 100 screws per 6 foot hinge length establishes a clear fastener count per opening, which supports planning for materials and helps maintain a uniform hold along the entire hinge. This model uses #5 flathead screws, unlike the 3 inch wide hinges in the same series that use #6 flathead screws, so installers working with different widths can match screw size to the exact hinge chosen. The lifetime finish across this hinge series means the bright brass appearance is engineered for long-term service, which benefits projects where hinges are fully visible on the exterior face of doors or lids.
The Larsen and Shaw piano hinge has an opened width of 1-1/2 inches and a length of 72 inches, which suits tall cabinet doors or long lids needing full-length support.
The hinge is a .060 gauge steel piano hinge, providing a relatively thick steel leaf that supports regular opening cycles in cabinetry and similar applications.
This Larsen and Shaw hinge has a bright brass finish, giving a brass-colored appearance that aligns with bright brass decorative hardware on cabinets or furniture.
The hinge uses countersunk holes for #5 flathead screws spaced 2 inches on center, supporting flush screw heads and an even clamping pattern along the hinge.
This Larsen and Shaw piano hinge requires 100 screws per 6 foot length, creating dense fastening for stable support along doors or panels.
Hinge widths in the series are 1-1/16, 1-1/4, 1-1/2, 2, and 3 inches opened, with this 1-1/2 inch size offering a midrange option for typical cabinet door edges.
The Larsen and Shaw piano hinge in bright brass, sized at 1-1/2 inches wide by 72 inches long in .060 gauge steel, offers continuous support along tall doors or lids. With countersunk holes on 2 inch centers for #5 flathead screws and 100 screws per 6 foot length, this hinge provides a clear fastening pattern that aids consistent installations. The lifetime bright brass finish and midrange width make this 1119E07FB piano hinge a practical choice when a visible, full-length steel piano hinge is needed on cabinet, casework, or furniture projects.
Sold In: 1 Each
