Larsen and Shaw piano hinge in black powdercoat .060 gauge steel gives a continuous hinge line that supports lids, doors, or panels along the full 72 inch length, which helps distribute load and stress more evenly than point hinges in many cabinet and woodworking builds. The 1-1/2 inch opened hinge width keeps the leaf footprint compact while still offering solid bearing across the joint, which suits narrow frames or edges where space is limited. The black powdercoat finish provides a dark, uniform appearance over the steel, which helps the hinge visually blend with darker casework or trim. A lifetime finish from Larsen and Shaw means the finish is designed for long-term performance, so the hinge stays service-ready over years of opening cycles in furniture, cabinetry, or built-ins.
Countersunk screw holes spaced 2 inches on center along cut lengths give a regular mounting pattern, which helps installers set a predictable screw layout that spreads holding power evenly along the piano hinge. All Larsen and Shaw piano hinge cut lengths in this line use #5 flathead screws, which lets installers plan a single screw size across typical widths for faster hinge installation and consistent seating of screw heads in the countersinks. The note that only the 3 inch wide hinges use #6 flathead screws clarifies that this 1-1/2 inch wide, 72 inch long hinge follows the #5 flathead requirement, which helps with planning inventory and tool setup on the job.
The 1-1/2 inch opened width on this Larsen and Shaw piano hinge suits cabinet, furniture, or casework edges where there is limited leaf room yet a continuous hinge is desired, which helps maintain clean lines on relatively narrow frames. The 72 inch overall length matches tall runs such as wardrobe doors, utility cabinets, or full-height panels, so one hinge can extend from top to bottom without breaks for consistent alignment. Being a steel piano hinge places it in applications where a metal hinge is preferred for strength, supporting lids or doors that see regular use in woodworking or shop environments. The black powdercoat finish pairs with black or dark hardware on cabinets or built-ins, giving designers and installers a hinge that visually integrates into darker schemes while still providing the strength of steel construction.
The .060 gauge steel leaf on this 1119E07PF piano hinge provides a defined thickness that helps the hinge resist twisting during handling and installation, which supports straight mounting lines when screws are driven into the substrate. Countersunk screw holes every 2 inches on center create a fixed spacing pattern, so installers can rely on consistent screw placement that distributes clamping force along the full 72 inch span and supports smooth pivot action. Using #5 flathead screws across this hinge line standardizes hardware selection, which simplifies stocking fasteners and reduces changeover during repetitive cabinet or furniture production. The lifetime finish from Larsen and Shaw means the black powdercoat finish is engineered for long-term service, which supports repeatable visual results across multiple jobs using the same hinge specification. As a piano hinge in the Larsen and Shaw family, it offers a continuous hinge solution that can be applied across different case sizes while keeping the same 1-1/2 inch width and black finish, which helps shops build consistent programs around a single hinge style.
The hinge is 1-1/2 inches wide when opened and 72 inches long, which suits tall cabinet doors or lids needing a continuous hinge along the full edge.
The 1119E07PF hinge is made from .060 gauge steel, which provides a solid leaf thickness for strength in furniture, cabinet, or casework applications.
This hinge uses countersunk screw holes spaced 2 inches on center along the length, which spreads holding power and supports even mounting.
This 1-1/2 inch wide hinge uses #5 flathead screws, aligning with the Larsen and Shaw line where only 3 inch wide hinges change to #6 screws.
The hinge has a black powdercoat finish with a lifetime finish from Larsen and Shaw, supporting long-term dark appearance on cabinets and furniture.
This product is a Larsen and Shaw piano hinge in the hinge family, providing a continuous full-length pivot for doors, lids, or panels.
This Larsen and Shaw piano hinge in 1-1/2 inch by 72 inch .060 gauge steel with black powdercoat finish brings a continuous, full-length pivot and a lifetime finish to cabinet, furniture, or casework projects. Regular 2 inch on-center countersunk holes and the specified #5 flathead screw size support efficient, repeatable mounting for production or one-off builds. For work that calls for a long, dark-finished steel piano hinge from a recognized hinge manufacturer, this 1119E07PF model delivers a defined spec that supports consistent results across multiple installations.
Sold In: 1 Each
