Larsen and Shaw antique brass piano hinge gives you a continuous, 72 inch long pivot for lids, doors, or panels that need smooth, even support along the full length, which helps reduce twist and sag on long runs. This 1-1/2 inch wide, 72 inch long steel piano hinge spans medium-length openings in one piece, so you can align a single hinge instead of juggling multiple butt hinges across the same edge. The .060 gauge steel construction provides a solid leaf thickness that stands up to repeated opening and closing in cabinetry or woodworking projects. The antique brass finish supplies a warm, traditional look that blends well with classic wood tones where exposed hardware appearance matters. A lifetime finish on the hinge surface protects the appearance over time, which supports long-term projects where rework for finish failure would be costly.
This Larsen and Shaw .060 gauge steel piano hinge uses countersunk screw holes spaced 2 inches on center along the leaf, so you can transfer hole locations quickly when drilling into doors, frames, or lids. The 1-1/2 inch opened width provides a clear edge reference, which helps when you are setting a consistent reveal or need the hinge barrel to align straight along a cabinet or case side. At 72 inches long, the hinge can run nearly full height on many tall cabinet doors or bench lids in one piece, which eliminates joint lines that could shift over time. The antique brass lifetime finish stays on the job for the life of the hinge, so once the layout and mounting work is done, the finished look remains stable.
This 1-1/2 x 72 steel piano hinge works well on projects that benefit from continuous support, such as medium-height doors, chest lids, and long access panels in cabinetry. The 72 inch length lets you cover most of a tall opening without splicing sections, which helps keep alignment consistent from top to bottom. The 1-1/2 inch opened width offers enough leaf surface to mount on many cabinet sides and door edges without crowding adjacent components. With an antique brass finish, this Larsen and Shaw hinge suits applications where the visible hinge needs to coordinate with other antique brass hardware and trim in the installation.
The .060 gauge steel used on this Larsen and Shaw piano hinge keeps the leaves flat and stable, which helps doors and lids track smoothly over repeated cycles without the hinge bending at the screw lines. Countersunk holes spaced 2 inches on center give you a consistent drilling rhythm, so you can maintain even screw spacing and reduce the chance of localized stress along the edge. Using #5 flathead screws in these countersunk holes lets the screw heads sit flush to the hinge surface, which keeps the leaves closing properly and prevents interference at the barrel. The lifetime finish on the antique brass surface means the installed look remains steady over the life of the hinge, which supports repeatable results when multiple openings in a project need to match.
The Larsen and Shaw antique brass piano hinge is 1-1/2 inches wide when opened and 72 inches long, which suits medium-height doors and lids that benefit from a single continuous hinge.
The hinge is made from .060 gauge steel, providing a solid leaf thickness that supports repeated use in cabinetry or woodworking applications without the hinge leaf easily deforming.
This piano hinge has countersunk screw holes spaced 2 inches on center, giving a regular pattern that helps distribute load evenly and simplifies drilling layouts along the edge.
This 1-1/2 inch wide hinge uses #5 flathead screws, so the screw heads sit properly in the countersunk holes and allow the leaves to close without interference at the barrel.
The hinge has an antique brass finish with a lifetime finish rating, which provides a warm, traditional appearance while protecting the surface for long-term use.
This hinge represents the antique brass option from Larsen and Shaw, which also offers piano hinges in bright brass, bright nickel, black powder coat, and bright zinc finishes.
The Larsen and Shaw antique brass piano hinge in 1-1/2 inch by 72 inch size brings together .060 gauge steel, a lifetime antique brass finish, and 2 inch on-center countersunk holes to support reliable cabinet and woodworking projects. The continuous length and regular hole spacing simplify alignment on medium-height doors, lids, and access panels where a straight, full-length pivot is important. For jobs that call for an antique brass look with consistent performance, this piano hinge offers a practical option that ties structural support to a finish designed to last.
Sold In: 1 Each
