Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I knob backplate is a zinc die cast backplate from the Elite I collection that sits behind a knob, creating a defined bearing surface that helps distribute knob load across the cabinet face. The satin nickel finish presents a neutral metal tone that coordinates with satin nickel knobs in the same run, giving doors and drawers a unified look across the project. The 4-1/8 inch length provides a longer visual footprint behind the knob, which helps cover previous knob impressions on refacing work or finish variations around the bore. The 1 inch width keeps the profile narrow, so the backplate adds definition without crowding narrow rails or stiles. A 1/8 inch projection stands the knob slightly off the surface, which creates clearance between the knob base and the door or drawer front and can reduce finish rub at contact points.
The SAP description states 4-1/4 L x 1 W, while the web description specifies a 4-1/8 inch length and 1 inch width, indicating a backplate sized around that length range for standard knob layouts. That length works with typical single knob bores while giving extra coverage above and below the hole on most cabinet faces. The 1 inch width keeps the plate within standard rail dimensions, so it fits comfortably on common face frame and panel profiles. The specified 8-32 x 1 inch screw size defines the threaded interface for the knob, guiding selection of knobs that match that screw threading for a proper mechanical connection at installation.
This Pro Value Series backplate belongs to the Elite I collection, which places it in a coordinated decorative hardware family for cabinets and similar casework. The satin nickel finish suits applications where satin nickel knobs or pulls are used, helping the backplate visually disappear into the hardware set rather than reading as a separate element. The backplate design supports use on doors and drawers that use a single knob connection point, since the overall footprint and centered bore orientation align with common knob placements. The 4-1/8 inch length and 1 inch width work on most face frame styles and slab fronts where a slim, elongated plate is preferred, which is useful in kitchens, baths, or built-ins needing a continuous design language.
The Elite I knob backplate uses a defined length around 4-1/8 inch, which provides a repeatable reference dimension when aligning hardware across multiple fronts on a run. That fixed length helps installers line up backplates relative to door and drawer edges, producing consistent reveals at each cabinet. The zinc die cast construction maintains the backplate shape under the compressive load of the 8-32 x 1 inch knob screw, which supports a stable interface at the bore and helps the knob remain square to the cabinet surface over time. The 1/8 inch projection shifts the contact point of the knob slightly away from the finished face, which can reduce direct wear on paint or stain films at high-use doors. The satin nickel finish ties the backplate to satin nickel knobs, simplifying hardware selection for projects that specify that finish throughout.
The Pro Value Elite I knob backplate is zinc die cast, which delivers a rigid metal plate behind the knob so the pull force transfers cleanly into the cabinet face.
This Elite I Series knob backplate has a satin nickel finish, allowing it to coordinate with satin nickel knobs and other satin nickel decorative hardware on the same project.
The satin nickel knob backplate is described as 4-1/8 inch length and 1 inch width, giving a slim footprint that suits standard cabinet fronts while covering the knob bore area.
This Pro Value Series backplate lists an 8-32 x 1 inch screw size, indicating the threaded connection used by the knob so the assembly tightens correctly against the backplate.
The zinc die cast backplate has a 1/8 inch projection, spacing the decorative surface slightly off the cabinet face for a defined shadow line around the plate.
The SZELI7-SN backplate belongs to the Elite I collection, aligning it with matching decorative hardware pieces specified under the same design family.
The Pro Value Elite I knob backplate in satin nickel pairs zinc die cast construction with a 4-1/8 inch by 1 inch footprint that suits standard cabinet fronts. With 1/8 inch projection and an 8-32 x 1 inch screw size specification, it supports practical cabinet hardware layouts where satin nickel knobs and coordinated backplates are specified together across doors and drawers.
Sold In: 1 Each
