Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I backplate identifies this piece as part of the Elite I collection, so it visually matches that series of pulls and keeps a consistent look across a run of cabinets or drawers. The backplate is made from zinc die cast, which creates a solid, uniform part that handles repeated use behind a working cabinet pull. The satin nickel finish provides a muted metallic look that pairs with satin nickel pulls and helps tie together doors, drawer fronts, and face frames. As a backplate, it sits between the pull and the cabinet surface, so it defines the outline around the pull and helps visually frame the hardware on each front.
The 3 inch center to center measurement sets the distance between the mounting points, so the pull posts and this backplate share the same spacing when mounted together on a cabinet face. The length of 6-1/2 inches and width of 1 inch define the footprint on the door or drawer front, which helps with planning clearances between adjacent pulls or nearby trim. The projection of 3/16 inch keeps the plate fairly low-profile, so it does not add much depth behind the pull and keeps the handle position close to the original layout.
This Pro Value Series backplate is part of the Elite I collection, which ties it directly to Elite I pulls for cabinet and drawer fronts using that style. The 3 inch center to center layout matches pulls drilled on 3 inch spacing, so it suits cabinets and furniture already bored for that standard size. With a length of 6-1/2 inches, the plate works well on typical kitchen, bath, or shop cabinet doors where a longer metal band under the pull matches rail or stile proportions. The 1 inch width keeps it narrow enough for face frames and narrower rails, so it stays within the flat area while still providing a defined border behind the pull body.
The 3 inch center to center spacing on this cabinet pull backplate 3 inch cc sets a fixed distance that aligns with common drilling jigs, so repeated installations along a bank of doors use the same holes for both pull and backplate. The 6-1/2 x 1 inch cabinet backplate footprint establishes a consistent visible band of satin nickel, which keeps each pull visually centered on the metal plate across multiple fronts. The zinc die cast material creates consistent dimensions from part to part, which supports uniform alignment when using the same layout marks across a large install. The satin nickel finish remains the same tone and sheen from backplate to backplate, so the hardware line looks continuous across full cabinet runs. The low 3/16 inch projection keeps the stack height behind the pull modest, which helps maintain a familiar grip feel compared to a pull mounted directly to the door.
The Pro Value Elite I backplate is drilled for 3 inch center to center spacing, so it aligns with pulls that mount on 3 inch post centers and uses the same hole layout.
The satin nickel Elite I backplate measures 6-1/2 inches long by 1 inch wide, so it spans a noticeable strip on the rail or stile behind the pull.
The backplate has a 3/16 inch projection, so it sits close to the cabinet surface while still giving a slight raised edge around the pull footprint.
The Pro Value Series Elite I backplate is made from zinc die cast, which produces a solid metal plate with consistent shape and dimensions.
This Elite I 3 inch center to center backplate uses a satin nickel finish, providing a soft metallic look that pairs with satin nickel pulls.
The backplate is specified with an 8-32 x 1 inch screw size, which matches standard cabinet pull screw threads used with this style of hardware.
The Pro Value Elite I backplate in satin nickel combines a zinc die cast body with a 6-1/2 by 1 inch footprint and 3 inch center to center layout, so it pairs with matching Elite I pulls on cabinets laid out for that spacing. For projects using satin nickel hardware across multiple doors and drawers, this backplate provides a defined metal band behind each pull that keeps finish, dimensions, and spacing consistent in every run.
Sold In: 1 Each
