Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I cabinet pull is a zinc die cast handle in an oil rubbed bronze finish that provides a coordinated look on cabinet doors and drawers in kitchens, baths, and built-ins. The pull uses 3 inch and 3-3/4 inch (96mm) center to center mounting, so it can match common hole spacings on existing fronts during replacements or new layouts. Its 5-1/8 inch overall length gives enough hand clearance along the stile or rail without crowding smaller fronts. A 3/4 inch projection sets the hand away from the surface to reduce knuckle contact and wear on the finish around the grip area. The 3/8 inch width keeps the pull visually light while still offering a defined edge to grab when opening heavier cabinet doors or loaded drawers on the job.
The center to center measurement of 3 inch and 3-3/4 inch (96mm) defines the hole spacing for this pull, so installers can align it with existing patterns or drill new pairs that match these standards. The 5-1/8 inch overall length gives a known span from end to end, helping lay out consistent reveals near door edges or drawer sides. A 3/4 inch projection sets the working stand-off from the face, which matters when aligning with neighboring pulls to keep clearances uniform across a run. The 3/8 inch width defines how far the pull covers the rail or stile, supporting accurate placement when working near panel details or narrow frame members.
The oil rubbed bronze finish on the Pro Value Elite I Series zinc die cast pull supports use anywhere a dark, classic look is preferred, such as face-frame kitchen cabinets, bathroom vanities, and storage built-ins. Its 5-1/8 inch length positions the hand across a broader section of the rail, which suits wider drawer fronts commonly found in base cabinets. The dual 3 inch and 3-3/4 inch center to center pattern gives flexibility across runs where some cabinets are drilled on imperial spacing and others on 96mm lines, so the same handle style can be used throughout the space. With a 3/4 inch projection, the pull stands off enough for fingers to clear applied moldings or raised panels around the gripping area, supporting comfortable use on detailed doors.
The zinc die cast construction of this Elite I pull creates a solid casting around the grip, which supports consistent feel from handle to handle on a large install. The 3/8 inch width defines a slim front profile, helping lines stay clean when multiple pulls are mounted in a grid across banks of drawers. The 3 inch and 3-3/4 inch center to center specification provides exact drilling references, which helps keep rows of pulls aligned both horizontally and vertically when laying out multiple fronts. The 5-1/8 inch overall length acts as a fixed reference when measuring offset from door edges, so installers can repeat the same setback dimension across all doors and drawers. The oil rubbed bronze finish visually ties each pull together within the Elite I collection, which supports a unified appearance on projects that mix door sizes and drawer configurations.
The SZELI6-ORB pull is made from zinc die cast material, which provides a solid, rigid handle body for repeated cabinet door and drawer use.
The SZELI6-ORB cabinet pull has 3 inch and 3-3/4 inch (96mm) center to center mounting, allowing alignment with common cabinet drilling patterns.
The Pro Value Elite I cabinet pull has a 5-1/8 inch overall length, providing a generous gripping span across cabinet doors and drawer fronts.
This oil rubbed bronze cabinet pull has a 3/4 inch projection, creating finger clearance between the handle and the cabinet face.
The Elite I Series zinc die cast pull is 3/8 inch wide, giving a slim profile that still offers a defined gripping edge on cabinet fronts.
The SZELI6-ORB cabinet handle uses an oil rubbed bronze finish, supporting a dark, traditional appearance on cabinets and drawers.
The Pro Value Elite I cabinet pull in oil rubbed bronze combines zinc die cast construction, 5-1/8 inch length, and 3 inch plus 3-3/4 inch center to center mounting for straightforward cabinet layouts. These fixed measurements support consistent drilling and alignment across doors and drawers, while the 3/4 inch projection and 3/8 inch width define a comfortable grip profile. For projects calling for Elite I collection styling with a dark finish and standard mounting patterns, this SZELI6-ORB pull delivers the dimensions and appearance needed to keep fronts uniform from one cabinet run to the next.
Sold In: 1 Each
