Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I Series 3 inch pull is a zinc die cast handle in the Elite I collection with a 3 inch (76 mm) center to center, so it gives a defined hand grip while matching common drilling patterns on cabinet doors and drawers. The oil rubbed bronze finish provides a dark, traditional appearance that helps projects align with oil rubbed bronze hinge and fixture selections in the same space. The pull measures 3-1/2 inch in overall length, which leaves a small margin beyond the 3 inch screw centers for visual balance on typical cabinet rail widths. A 1 inch projection sets the handle out from the door or drawer front, creating finger clearance for everyday use without extending excessively into walkways. The 1/2 inch width offers a slim front profile that reads visually light while still registering under the hand during operation.
This Elite I 3 inch center to center pull is laid out around the 3 inch mounting distance, so boring for the handle follows a straightforward two-hole pattern when setting up cabinet faces. The 3-1/2 inch length determines where the ends of the pull land relative to the screw centers, which matters when aligning hardware visually near panel edges and frame members. With its 1 inch projection, the pull establishes a known standoff from the surface, helping installers anticipate clearance around adjacent doors or drawer fronts. The 1/2 inch width sets how much of the rail or drawer front is covered by the handle, which can be useful when positioning pulls around centerlines and stile transitions.
This Pro Value Series cabinet pull is part of the Elite I collection and classified under handles and pulls, so it serves as a decorative and functional grip on cabinet doors and drawers. The 3 inch center to center size matches a common standard used in many cabinet layouts, which works well when hardware is planned across banks of drawers or multiple wall cabinets using a repeating boring pattern. At 3-1/2 inch length, the pull is sized for typical cabinet faces, allowing it to sit comfortably on standard-width rails or drawer fronts without dominating the panel. The oil rubbed bronze finish ties the look of the pull to oil rubbed bronze themes, supporting projects that are built around that color family for hinges, faucets, or lighting.
The 3 inch center to center measurement defines the distance between mounting points, which drives jig placement and drilling accuracy during installation work. The 3-1/2 inch overall length then controls how much hardware extends beyond those points, making it easier to line up multiple pulls at consistent offsets from door and drawer edges. A 1 inch projection gives a fixed depth off the surface, which helps maintain uniform clearances when doors and drawers are installed in tight reveals. The 1/2 inch width defines the front face size, aiding in setting visual balance on narrower frames or slab fronts. The zinc die cast construction means the pull is formed from metal, giving it a single-piece feel when mounted. The oil rubbed bronze finish provides the final visual layer, helping the hardware read as part of a coordinated decorative hardware and moldings selection.
This Elite I pull has a 3 inch (76 mm) center to center, so drilling layouts are based on that spacing when setting up cabinet doors and drawers.
The Pro Value Elite I Series 3 inch pull measures 3-1/2 inch in overall length, which helps it sit proportionally on standard cabinet rails and drawer fronts.
The pull has a 1 inch projection, setting the grip off the cabinet surface to allow hand clearance while keeping a compact profile.
This zinc die cast cabinet pull has a 1/2 inch width, giving it a narrow face that works well on smaller fronts or narrow rails.
The SZELI2-ORB pull is made from zinc die cast material with an oil rubbed bronze finish, combining metal construction with a dark, traditional appearance.
This cabinet pull is from the Pro Value Series brand and is part of the Elite I collection, placing it within a defined decorative hardware family.
The Pro Value Elite I Series 3 inch pull combines a 3 inch center to center layout, 3-1/2 inch length, and 1 inch projection, so its mounting and clearance characteristics are clearly defined for cabinet work. The zinc die cast construction and oil rubbed bronze finish give it both a metal base and a specific color tone, supporting projects centered on oil rubbed bronze decorative hardware. With its classification as a handle and pull in the Elite I collection, it is positioned as a functional cabinet grip with consistent measurements ready for layout on doors and drawers.
Sold In: 1 Each
