
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro Value Elite I knob backplate describes a backplate from the Elite I collection that pairs with a knob to finish a cabinet installation, so the knob sits on a defined metal surface instead of directly on the door or drawer front. The zinc die cast material means the backplate is made from zinc-based cast metal, which provides a solid mounting surface that helps distribute knob load across the 4-1/8 inch length. The 4-1/8 inch length measurement defines how far the backplate runs along the cabinet face, giving a consistent visual span behind the knob centerline. The 1 inch width dimension sets the coverage across the grain, which matters when covering previous knob marks or finishing a specific rail or stile width. The 1/8 inch projection indicates a low-profile stand-off from the door or drawer, helping the knob land close to the face while still defining the backplate edge.
The 4-1/8 inch length on this backplate sets a predictable span for layout across rails and stiles, helping installers center the plate relative to door width or drawer fronts. The 1 inch width works within common face-frame and frameless door stile dimensions, letting the plate sit fully on the flat panel area during installation. The 1/8 inch projection from the surface establishes a shallow profile that keeps the knob close to the cabinet face, which supports a familiar hand feel while still visually framing the base of the knob. The 8-32 x 1 inch screw size listing defines the thread standard and typical reach through a door or drawer front, so the mounting hole and hardware choice can match standard cabinet knob drilling and fastening practices.
The designation as a backplate under Decorative Hardware & Moldings and Backplates places this part in cabinet and furniture hardware work, where a knob needs a defined base on the face. The oil rubbed bronze finish means it fits projects that specify oil rubbed bronze hardware across doors and drawers, allowing the backplate to align with other oil rubbed bronze components in the space. The 4-1/8 inch length allows use on wider drawer fronts and many cabinet doors where a longer plate behind a single knob is desired, giving a stretched visual line across the surface. The 1 inch width lets the plate sit comfortably on typical cabinet stiles and drawer rails without crowding nearby edges, which is useful when following tight reveal layouts on face frame or frameless construction. The 1/8 inch projection keeps the profile subtle against the door or drawer, so the backplate reads as a finished trim piece instead of a bulky spacer.
The zinc die cast material creates a dense, stable part that resists flex when the knob is pulled, which supports keeping the knob and backplate joint tight over repeated use. The 4-1/8 inch length distributes load along more of the cabinet face than a small washer-style plate, so the stress from the 8-32 x 1 inch screw and knob is spread across a larger area during operation. The 1 inch width provides enough surface contact to seat flat on common cabinet panel zones, helping maintain full back contact when the knob is torqued. The 1/8 inch projection ensures the backplate edge is visible around the knob base without creating excessive stand-off, maintaining both a finished border and a compact feel. The oil rubbed bronze finish visually coordinates with other oil rubbed bronze cabinet hardware components, supporting cohesive hardware runs on multi-door and multi-drawer installations.
The Pro Value Elite I knob backplate has a length of 4-1/8 inch, a width of 1 inch, and a projection of 1/8 inch, giving a long, narrow footprint with a low-profile stand-off from the cabinet face.
The SZELI7-ORB backplate is made from zinc die cast material, providing a solid metal base behind the knob that supports load distribution on cabinet doors and drawers.
This Elite I Series knob backplate uses an oil rubbed bronze finish, so it matches cabinet projects that specify oil rubbed bronze decorative hardware for a consistent appearance across the installation.
The Pro Value Elite I knob backplate has a projection of 1/8 inch, creating a shallow stand-off that keeps the knob assembly close to the door or drawer front while outlining the knob base.
This oil rubbed bronze knob backplate is specified with an 8-32 x 1 inch screw size, aligning with standard cabinet knob mounting hardware dimensions used in many installations.
The 4-1/8 inch length gives the backplate a longer visual span, which helps center the hardware on doors or drawers and provides more coverage behind the knob location.
The Pro Value Elite I knob backplate in oil rubbed bronze combines a 4-1/8 inch length, 1 inch width, and 1/8 inch projection to frame a cabinet knob on the face. The zinc die cast construction provides a solid metal base that supports the knob connection on active doors and drawers. The 8-32 x 1 inch screw size specification ties the backplate to standard cabinet knob hardware, which fits common drilling and fastening patterns in cabinet shops and on site. For projects calling for oil rubbed bronze decorative hardware with a defined backplate behind each knob, this Elite I Series part aligns finish, length, and footprint with that requirement.
Sold In: 1 Each