Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I pull gives you a 3-3/4 inch (96 mm) center to center handle layout, which matches common drilling patterns so existing cabinet holes can be reused on many jobs without changing your basic layout. The oil rubbed bronze finish on this pull provides a dark, warm look that works well when you want contrast against lighter doors or to coordinate with other bronze-finished decorative hardware. The 4-1/2 inch overall length creates enough hand contact area for everyday cabinet or drawer use while still fitting on narrower rails. A 1 inch projection sets the pull off the front, creating finger clearance that supports comfortable opening and closing. The 1/2 inch width gives the pull a slim profile across the front of the cabinet, which helps when spacing pulls on smaller drawer fronts or tight face-frame sections.
The 96 mm center to center dimension on this Pro Value Series pull sets the exact spacing between fasteners, which is critical when drilling new cabinet fronts or aligning with pre-bored holes. The 4-1/2 inch length then defines how far the ends extend past the mounting points, helping you judge visual proportion on doors and drawers of different widths. A 1 inch projection determines how far the grip stands off from the surface, which affects both hand clearance and how far the pull protrudes into doorways or walk paths. The 1/2 inch width determines how much face area the pull covers on the front, which matters when you coordinate multiple pulls across matching cabinet lines.
This Pro Value Elite I pull is identified as a handle within Decorative Hardware & Moldings in the Handles and Pulls category, so it is suited to cabinet and casework applications where a mounted pull is needed on doors or drawers. The 3-3/4 inch (96 mm) center to center measurement aligns with a common cabinet handle size, which makes this pull practical when you are outfitting multiple fronts in kitchens, baths, or built-ins using a consistent boring pattern. Its 4-1/2 inch length provides scale that works on standard cabinet door stiles and mid-size drawer fronts, supporting a uniform look across upper and lower cabinets. The oil rubbed bronze finish ties the pull visually to other oil rubbed bronze items, which helps build a coordinated decorative hardware scheme on a project.
The zinc die cast material used for this SZELI1-ORB cabinet handle provides a consistent base structure, which helps maintain uniform dimensions from pull to pull when you are lining up handles in rows. The specified 96 mm center to center size gives you a fixed drilling reference, which supports accurate jig setup and repeatable boring across multiple cabinet faces. The 1 inch projection value tells you exactly how far the pull stands off the surface, which helps you anticipate how doors and drawers will operate when placed near walls or adjacent cabinetry. The 1/2 inch width defines the visible bar thickness, which allows you to balance this pull with other decorative handles and pulls on the same run so sightlines stay consistent. The Pro Value Series and Elite I naming and the manufacturer part number SZELI1-ORB give you a clear product identity, which helps when you need to match this exact pull on future phases or replacement work.
The pull has a 3-3/4 inch (96 mm) center to center measurement, which sets the hole spacing used when mounting it on cabinet doors or drawers.
The Pro Value Elite I pull has a 4-1/2 inch overall length, which defines how much of the cabinet front the handle visually spans.
This oil rubbed bronze cabinet pull projects 1 inch from the cabinet surface, providing defined finger clearance for everyday operation.
The SZELI1-ORB cabinet handle has a 1/2 inch width, which keeps the pull visually slim on cabinet faces and drawer fronts.
The Elite I oil rubbed bronze pull is made from zinc die cast, providing a cast metal base consistent with other zinc decorative handles.
This cabinet pull is part of the Elite I collection under the Pro Value Series, which identifies its style family within decorative hardware.
This Pro Value Elite I pull with a 3-3/4 inch (96 mm) center to center layout, 4-1/2 inch length, 1 inch projection, and 1/2 inch width gives you defined dimensions for cabinet and drawer work. The zinc die cast construction and oil rubbed bronze finish establish both base material and appearance, tying into Decorative Hardware & Moldings needs. Using the SZELI1-ORB part number, this Pro Value Series cabinet pull can be specified whenever an oil rubbed bronze handle with these measurements is required on a project.
Sold In: 1 Each
