Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I satin nickel pull provides a 3-3/4 inch (96 mm) center to center grip that operates cabinet doors and drawers with a consistent hand spacing, which helps keep alignment uniform across a run of fronts. The pull uses a zinc die cast construction that forms a solid, single-piece handle, giving a firm feel during daily opening and closing. Its satin nickel finish creates a muted metal surface that visually matches other satin nickel decorative hardware, helping maintain a coordinated look from cabinet to cabinet. The pull length of 4-1/2 inches leaves usable grip area beyond the 96 mm mounting points, which is useful when hands approach from different angles. A 1 inch projection holds the gripping surface off the door or drawer face, so fingers clear the front during operation.
The 3-3/4 inch (96 mm) center to center measurement controls the distance between the two mounting points, allowing installers to work directly from this number when drilling or using a boring jig. With a projection of 1 inch, the pull stands out from the cabinet face at a fixed depth, which keeps door and drawer fronts from being rubbed by hands during use. The 4-1/2 inch overall length and 1/2 inch width define the contact area on the surface, making it easier to position the pull so it stays clear of edge profiles or panel detailing. The satin nickel finish and zinc die cast construction stay consistent across each piece, which simplifies visual layout when aligning several pulls in rows.
This Elite I 96mm center to center pull serves on cabinet doors and drawers where the 3-3/4 inch hole spacing matches the planned layout, helping maintain a repeating pattern along uppers and bases. The 4-1/2 inch length provides enough bar for both small and larger fronts, so a single pull style can carry through an entire run. Its satin nickel finish places it within decorative hardware and moldings lines that favor this muted metal tone, which helps the pull coordinate visually with other satin nickel handles and pulls on the same project. The zinc die cast construction gives the pull a solid feel on frequently used access points such as kitchen or shop cabinets, supporting regular grip without noticeable flex. With a 1/2 inch wide profile, the pull fits comfortably on narrower face frames and drawer fronts where space is limited between neighboring components.
The defined 3-3/4 inch (96 mm) center to center spacing on this Pro Value Series cabinet pull lets installers standardize drilling patterns so each door and drawer receives the same mounting layout, reducing the chance of misaligned hardware. Because the pull length is 4-1/2 inches, there is consistent visual margin beyond the screw centers, which helps line hardware up with stile edges or drawer top rails. The fixed 1 inch projection creates a uniform stand-off from the cabinet surface, so rows of pulls sit at the same depth and cast matching shadows along the fronts. The 1/2 inch width keeps every pull the same narrow bar profile, making it easier to maintain straight sightlines when viewing a bank of cabinets from across the room. The satin nickel finish and zinc die cast body stay visually and dimensionally consistent piece to piece, aiding repeatable results on multi-cabinet installations.
The Pro Value Elite I satin nickel pull has a 3-3/4 inch (96 mm) center to center measurement, which sets the drilling distance between the two mounting holes.
The pull length is 4-1/2 inches, giving extra bar beyond the mounting points for a comfortable hand grip and balanced appearance on cabinet fronts.
The pull is made from zinc die cast, providing a solid, one-piece construction that supports repeated opening and closing of doors and drawers.
The projection is 1 inch, setting the distance the pull stands off the cabinet face so fingers can fit between the pull and the surface.
The pull has a 1/2 inch width, creating a narrow bar that suits tight layouts on smaller drawer fronts and door stiles.
This pull is part of the Elite I collection, keeping its style aligned with other Elite I decorative handles and pulls.
The Pro Value Elite I satin nickel pull combines a 3-3/4 inch (96 mm) center to center layout, 4-1/2 inch length, and 1 inch projection into a single zinc die cast handle that suits many cabinet runs. With its Elite I collection styling and satin nickel finish, it supports consistent dimensions and appearance across multiple doors and drawers. For projects needing a 96 mm layout with a 1/2 inch wide bar pull, this SZELI1-SN satin nickel cabinet pull offers a clearly defined set of measurements to work into the drilling plan.
Sold In: 1 Each
