
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro Value Elite I weathered nickel knob describes a 1-1/4 inch diameter cabinet knob from the Pro Value Series that gives cabinets and furniture a consistent look across multiple doors and drawers. The Elite I collection identity ties this knob to a defined design family, which helps maintain visual continuity on a full run of cabinets. The 1-1/4 inch diameter size creates a comfortable grip area that is easy to grab during regular use on doors or drawers. A 1 inch projection sets the hand clearance from the face of the front, which helps users pull without their fingers rubbing against the surface. The weathered nickel finish provides a muted metallic appearance that works where a softer, aged nickel tone is preferred over bright metal. The zinc die cast material forms a solid, uniform knob body that supports repeatable performance on everyday residential or light commercial cabinet applications.
The knob uses an 8-32 x 1 inch screw size as its threaded interface, matching a common cabinet hardware standard so installers can work with familiar drilling and tapping expectations. The 1-1/4 inch diameter dimension defines how much space the knob face occupies on the door or drawer front, which matters when laying out multiple knobs on narrow rails or smaller fronts. A 1 inch projection measurement indicates how far the knob stands off from the cabinet face, helping lay out clearances near adjacent walls, appliance panels, or other hardware. The width stated at 1-1/4 inch aligns with the diameter, confirming a round profile that simplifies alignment because orientation does not affect the visible shape.
This Elite I Series weathered nickel knob fits naturally wherever a round 1-1/4 inch diameter pull is appropriate, such as cabinet doors and drawer fronts that can benefit from a single centered grip point. The weathered nickel finish supports projects that call for a softer metallic tone, allowing this knob to blend into transitional or traditional cabinet styles that favor an aged appearance. Because the knob width and diameter are both 1-1/4 inch, the round footprint remains compact enough for smaller drawer fronts while still large enough for comfortable daily use on larger doors. The 1 inch projection supports mounting on standard face frame or frameless cabinet fronts where moderate stand-off is desired between the hardware and the finished surface. On furniture-style pieces or built-ins, this zinc die cast cabinet knob can provide a uniform touch point that ties multiple units together visually through the shared Elite I collection styling.
The use of an 8-32 x 1 inch screw size provides a predictable thread standard that aligns with many cabinet knob drilling layouts, which can help speed installation workflows when repeating the same bore size across a room. Knowing the projection is 1 inch allows installers to plan door and drawer operation near adjacent obstacles with confidence about how far the knob will extend into the room. The 1-1/4 inch diameter measurement gives a clear reference for setting edge distances from stile or rail borders, reducing the chance of a knob visually crowding trim details. Because the knob is zinc die cast, its uniform casting supports consistent seating against the cabinet surface once tightened, which helps maintain a clean, flush appearance. The Elite I collection designation also simplifies repeat orders or later add-ons, since referencing the same series and finish helps maintain a cohesive hardware layout over time.
The Pro Value Elite I weathered nickel knob has a 1-1/4 inch, or 32 mm, diameter, giving a medium-size grip that suits typical cabinet doors and drawer fronts.
The knob has a 1 inch projection from the cabinet surface, creating practical finger clearance while keeping the hardware close to the face for a compact profile.
The SZELI8-WN cabinet knob is made from zinc die cast, providing a solid cast metal body that supports consistent feel and appearance in everyday cabinet use.
This Elite I Series knob has a weathered nickel finish, giving a muted metallic look that pairs well with projects using an aged or softer nickel appearance.
The cabinet knob uses an 8-32 x 1 inch screw size, matching a common cabinet hardware thread standard that integrates with many existing drilling setups.
The manufacturer part number is SZELI8-WN, which identifies this specific Pro Value Series Elite I 1-1/4 inch weathered nickel knob for ordering and reordering.
The Pro Value Elite I weathered nickel knob, SZELI8-WN, combines a 1-1/4 inch diameter, 1 inch projection, and zinc die cast construction to support everyday cabinet projects. The weathered nickel finish and Elite I collection identity help align style across doors and drawers while the 8-32 x 1 inch screw interface matches common cabinet hardware standards. For installers and shops planning a coordinated hardware layout, these defined dimensions and finish details support straightforward specification across kitchens, baths, and built-ins.
Sold In: 1 Each