Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Elite I cabinet pull is a zinc die cast handle in an oil rubbed bronze finish that gives cabinets a specific look while keeping a consistent appearance across a run of doors and drawers. The pull has a 3 inch (76 mm) center to center dimension, which sets fixed drilling locations and simplifies layout when repeating holes across multiple fronts. Overall length is 4-1/2 inches, so the grip spans a comfortable area on typical cabinet doors without crowding adjacent hardware. The pull projects 1 inch from the surface, creating finger clearance that helps with regular use on doors and drawers. A width of 1/2 inch provides a defined edge to grab, which supports a steady hand when opening heavier fronts. The product is part of the Elite I collection, tying it to a coordinated design line for projects that standardize hardware.
The 3 inch center to center dimension on this Pro Value Series zinc cabinet pull defines the distance between mounting points, which matters when drilling new holes or aligning with existing 3 inch bores. With a 4-1/2 inch overall length, the pull extends beyond the mounting holes, providing visual balance on both sides of the screws for typical door and drawer widths. The 1 inch projection controls how far the grip stands away from the cabinet, which influences how comfortably fingers can wrap behind the pull during operation. A 1/2 inch width concentrates the gripping area, which can help maintain clearance near neighboring doors where space is tight. The Elite I collection reference ties this pull to a specific style line, which supports consistent design when fitting multiple cabinets in one installation.
This 3 inch center to center cabinet pull is designed for cabinet applications where a standard 3 inch bore pattern is used, which fits many residential and light commercial cabinet layouts. The Pro Value Elite I cabinet pull length of 4-1/2 inches makes it suited to typical kitchen and bath cabinet doors, because the added length beyond the screw points gives users more area to grasp. Its 1 inch projection is set to create working space between the handle and the door face, which helps when hands are wet or gloved and need clear access behind the pull. A 1/2 inch width keeps the profile slim, which can be useful on narrower drawer fronts or frame sections where hardware needs to stay within a limited rail height. The oil rubbed bronze finish ties into projects that are already using that finish tone, allowing this pull to function as part of a coordinated decorative hardware and moldings scheme.
The zinc die cast material on this pull provides a molded, dimensionally controlled body, which supports consistent alignment when many pulls are installed across a large cabinet run. With the SZELI10-ORB manufacturer part number, the product can be reordered under the same identifier, which helps keep future replacements visually matched to the original installation. The 3 inch center to center spacing remains a key reference, because it allows installers to reuse standard drill jigs set for that measurement, which reduces layout time and helps keep hardware straight. The oil rubbed bronze finish on each pull is a defined specification, which supports uniform appearance when multiple pulls are installed under the same light conditions. The 4-1/2 inch length, 1 inch projection, and 1/2 inch width together define the pull envelope, which helps designers and installers visualize clearances to adjacent walls, appliances, or neighboring hardware before drilling. Being part of the Pro Value Series and Elite I collection places this pull within a recognizable product class, which can simplify hardware schedules where consistent style and dimensions are required.
The SZELI10-ORB pull has 3 inch center to center spacing, a 4-1/2 inch overall length, 1 inch projection, and 1/2 inch width, which together define drilling layout and hand clearance.
The 3 inch center to center spacing matches a common cabinet drilling pattern, which lets installers use standard jigs and repeat hole locations across many doors.
The Elite I cabinet pull is zinc die cast, which provides a rigid molded body that maintains its shape and dimensional consistency across multiple pieces.
The Pro Value Elite I cabinet pull has an oil rubbed bronze finish, which sets the color and surface look to coordinate with similar oil rubbed bronze hardware.
The 1 inch projection holds the grip away from the cabinet face, creating finger clearance that helps users pull doors and drawers without scraping knuckles.
The Elite I collection designation links this pull to a specific style family, helping projects keep hardware design and dimensions consistent across multiple cabinets.
The Pro Value Series Elite I Series 3 inch center to center oil rubbed bronze pull gives installers a defined set of dimensions and a specific finish for cabinet projects. With zinc die cast construction, 4-1/2 inch overall length, 1 inch projection, and 1/2 inch width, it provides a repeatable hardware choice for doors and drawers. Using the SZELI10-ORB part number from Wurth Baer Supply connects orders to this exact pull so cabinet runs can stay consistent over time.
Sold In: 1 Each
