Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer 5375 is a 38 inch full-extension side-mount ball bearing drawer slide rated 550 lb per pair, with both hold-in and hold-out detents for drawers that need to stay put whether open or closed. Built for shop, industrial, and commercial applications where a standard cabinet slide would be out of its class.
This slide is specified for drawers that live well beyond the reach of residential hardware. Think tool chests and machinist's cabinets stacked with metal, service carts loaded with parts inventory, heavy-duty workbench drawers, and industrial storage built for shift after shift of daily use. The hold-in/hold-out combination is particularly valuable in active work environments: the hold-out keeps the drawer fully extended and stationary while a technician loads or unloads both-handed, then the hold-in stops a loaded drawer from drifting or rebounding when pushed shut. At 38 inches of slide length, this is also the right choice for deep drawers where a shorter slide would leave too much weight unsupported.
The slide is cold-formed steel with a zinc finish — the standard corrosion-resistant coating for indoor industrial hardware. Zinc protects the steel members through years of heavy-cycle service in dry environments. This is a working finish, not a decorative one: it holds up on a shop floor without demanding attention. The slide requires 3/4 inch of side clearance per side, which is wider than the 1/2 inch standard for residential cabinet slides, so the drawer box must be sized accordingly before installation.
The Fulterer 5375 fits shops, integrators, and facilities teams who need a verified 550 lb rating with detent control in both positions. Cabinet shops building custom tool storage, millwork shops speccing out heavy-pull-out workstations, and contractors sourcing hardware for commercial service counters and industrial casework are the natural buyers. The non-handed format means one part number covers every drawer in a run, and full extension means nothing stays buried at the back of a 38 inch deep drawer. For indoor applications only — zinc is not a marine or exterior finish.
That is the rating per pair — one pair of slides supports up to 550 lb of drawer and contents combined.
Hold-in is a detent that keeps the drawer closed and stops it from bouncing back open after it is pushed shut. Hold-out is a separate detent that holds the drawer at full extension until intentionally pushed back in. This slide has both — it detents in the closed position and in the open position.
No. The hold-in detent keeps the drawer closed once it is shut, but there is no damper. This is not a soft-close slide — the drawer moves freely and stops at each detent position.
The heavier rail construction at this load class requires a wider profile, so the clearance per side is 3/4 inch rather than the 1/2 inch common on residential slides. Build the drawer box 1-1/2 inches narrower than the cabinet opening to leave the correct gap on each side.
Side-mount slides in a face-frame cabinet need support at the rear of the slide. Add the appropriate rear mounting bracket for this series — brackets are series-specific and sold separately.
When the drawer carries real weight and needs to stay exactly where it is placed, the Fulterer 5375 delivers a verified 550 lb rating, full access, and positive detent control in both directions — ready for demanding shop and commercial environments.
Sold In: 4 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 2 Set |  FTFR5400-12BRKT Mfr# 5527 | Fulterer 12" Side Mount Bracket, Unhanded Zinc - 5527 |
