Hettich Quadro V6 5D 12" Soft-Close Full Extension Undermount Drawer Slides, Ball Bearing Left hand Zinc - 9374863

Hettich Quadro V6 5D Undermount Slide Purpose

Hettich Quadro V6 5D undermount slide defines this 12 inch soft-close, full extension, left hand drawer slide as an undermount drawer slides component, so the slide stays hidden under the drawer while still delivering full travel for better access to stored items. The integrated Silent System provides soft-close action, which slows the drawer near the end of travel to reduce slamming in everyday cabinet use. Ball bearing construction inside the slide supports smooth running, which helps drawers feel consistent across a full bank of cabinets. This left hand version is part of the Hettich Quadro V6 5D system, so it works as the left side running element in an undermount pair. The galvanised steel material resists normal shop and kitchen environments, helping the slide maintain function over time under typical indoor conditions.

Key Functional Details For Daily Drawer Use

• The load capacity up to 30 kg for standard applications sets a clear limit for drawer weight, supporting typical residential or light commercial storage loads without overstressing the slide.
• A version available for particularly light drawers up to 10 kg targets smaller, lighter drawer designs, helping match slide performance to minimal loads for smoother, controlled motion.
• Full extension travel allows the drawer to open to its rated length, making the back of the drawer easier to reach and simplifying access when storing tools, fittings, or small hardware.
• The integrated Silent System with soft closing lets drawers close gently, reducing impact forces on the cabinet and front, which can support quieter operation in busy work areas.
• Galvanised steel construction offers a protective finish on the slide components, which supports resistance to typical indoor moisture and wear so motion characteristics stay more consistent.

Installation And Front Adjustment Capabilities

Slide on installation with 2D front fixing clips defines how this undermount slide system attaches, providing a slide-on connection that speeds mounting at the bench. Tool-less, intuitive adjustment of the drawer front panel means height, side, depth, tilt, and radial positions can be changed without tools at the front, which helps fine-tune reveals after the drawer is hanging. Height adjustment up to plus 3 mm allows the front to be raised relative to the opening, which helps align top gaps across a run of cabinets. Side adjustment up to plus or minus 1.5 mm, with a maximum drawer side profile thickness 15 mm, lets the front shift sideways within that range, helping dial in even side reveals where cabinet openings vary slightly.

Using This Left Hand Full Extension Slide

Where This 12 Inch Slide Fits Best

The 12 inch soft-close full extension undermount drawer slide format suits short-depth drawers where a 12 inch nominal drawer length matches cabinet depth, supporting typical base cabinet and utility drawers built around that length. The left hand configuration ties directly to the manufacturer part number 9374863, so this slide functions as the left running component in a matched left and right undermount pair for one drawer. Load capacity up to 30 kg for standard applications positions this slide for drawers carrying typical contents such as utensils, small tools, or fittings within that weight range, avoiding overloading under normal use. The option of a version for particularly light drawers up to 10 kg broadens the system range, which helps designers choose a slide that better matches light-duty drawer constructions within the same Quadro V6 5D family.

Adjustment Range Supporting Consistent Results

Tool-less, intuitive adjustment of the drawer front panel allows installers to use built-in mechanisms to correct alignment without separate tools, which saves time during final set-up on site or in the shop. Depth adjustment up to plus 2 mm and minus 1 mm lets the front move in and out relative to the cabinet, which helps align fronts flush across adjoining cabinets even when carcass depths vary slightly. Tilt adjustment up to plus 4 mm provides a controlled way to angle the drawer front, which assists in matching top and bottom gaps when cabinets or floors are not perfectly level. Radial adjustment up to plus or minus 1.5 mm offers another fine-tuning axis, helping achieve square appearance of the front relative to the opening. Load capacity to EN 15338, Level 3 ties slide performance to a defined standard, which gives a benchmark for expected durability in typical drawer duty cycles.

Common Questions About This Hettich Undermount Slide

Selecting This Slide For Your Drawer Build

This Hettich Quadro V6 5D undermount slide pairs a 12 inch full extension format with an integrated Silent System, so it suits short drawers needing soft closing and full access. The left hand designation and manufacturer part number 9374863 identify it for use as the left runner within a matched pair, which helps align product selection with the required side. The combination of slide on installation with 2D front fixing clips and tool-less front adjustment supports efficient fitting and front alignment on cabinetry projects. For woodworking and cabinet shops sourcing undermount drawer slides from Wurth Baer Supply, this model provides a defined 30 kg standard load capacity and adjustment range within the Quadro V6 5D system.