Hettich Quadro V6 5D 10-Pack 18" Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9374900

Five-Axis Adjustment and Full Extension in a Concealed 18 Inch Runner

This is the right-hand member of Hettich's Quadro V6 5D undermount slide in the 18 inch length — a ball-bearing, full-extension concealed runner with integrated soft-close and five-axis front adjustment, rated 90 lb per pair, for drawer boxes with 1/2 to 5/8 inch sides.

Key Features

• Five-axis (5D) adjustment lets the installer fine-tune the mounted drawer front in height, side, tilt, depth, and a fifth axis after the drawer is hung.
• Full extension brings the entire 18 inch drawer box out to the cabinet face for unobstructed access to the back.
• Integrated soft-close catches the drawer near the end of travel and settles it shut without slamming.
• 90 lb capacity per pair handles loaded kitchen, bath, and utility drawers with room to spare.
• Ball-bearing carriage runs smoothly under load and holds its feel over years of cycling.
• Right-hand orientation — pair with the matching left-hand Quadro V6 5D to complete one drawer installation.

Where Five-Axis Adjustment Earns Its Keep

Most undermount slides stop at two or three directions of front adjustment. The Quadro V6 5D adds tilt and a fifth axis on top of the usual height, side, and depth moves, which means an out-of-square drawer front can be walked into alignment without shimming or re-hanging the box. That capability pays off most in production cabinet runs — where accumulated tolerance across a bank of drawers would otherwise demand time-consuming individual fixes — and on tall or wide fronts where even a degree of tilt reads clearly. It also simplifies the finishing pass on custom work, giving the installer a precise tool rather than a shim-and-hope approach.

Construction Built for Long Service

The Quadro V6 5D runner is steel with a zinc finish, running on ball bearings rather than rollers. Ball bearings distribute load across more contact points, which keeps travel consistent as the drawer is used over thousands of cycles. The zinc finish provides reliable corrosion resistance for dry indoor service. Because the slide mounts beneath the drawer box and out of sight, the finish is functional — it protects the steel, not the aesthetic of the cabinet interior.

Who This Runner Suits

Cabinet shops producing frameless Euro-style work will find the Quadro V6 5D drops into their workflow directly. It also installs in face-frame cabinets with the correct Quadro-specific rear mounting brackets, making it a single runner choice across mixed production. Designers specifying premium concealed hardware for residential kitchens and baths get the 5D adjustment range without stepping up to a powered or synchronized system. For drawer boxes built with 1/2 to 5/8 inch sides — dovetailed maple, doweled Baltic birch, or CNC-machined plywood — this slide fits the most common shop material without a model switch.

The Right Tool for Precise Front Alignment

When drawer-front alignment needs to be dialed in after install rather than shimmed at rough-in, the Quadro V6 5D gives the installer the range to do it cleanly — pair the right-hand member here with its left-hand mate, build the box to the Hettich specification, and the adjustment range handles the rest.