Hettich Quadro V6 5D 10-Pack 21" Soft-Close Full Extension 90 lb Undermount Drawer Slide, Right Hand, Zinc, 9374902

21 Inch Undermount Slide For Five-Axis Front Adjustment

The Hettich Quadro V6 5D is a 21 inch concealed undermount drawer slide with integrated soft-close, full extension, and ball-bearing precision — sold here as the right-hand member, for drawers with 1/2 to 5/8 inch sides in face-frame or frameless cabinets.

Key Features

• 5D front adjustment lets the installer dial in height, side, tilt, depth, and twist after the drawer is fully hung — the most adjustment axes available in this line.
• Full extension brings the complete 21 inch drawer out to the cabinet face, putting the back of the box fully within reach.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently without a separate damper add-on.
• 90 lb capacity per pair covers loaded kitchen, bath, and utility drawers with room to spare.
• Ball-bearing carriage delivers smooth, stable travel under load across the full 21 inch stroke.
• Right-hand orientation — pair this member with its left-hand counterpart to complete one working drawer set.

Where the 5D Adjustment Makes a Difference

Most undermount lines offer two or three directions of fine-tuning at the front locking device. The Quadro V6 5D adds tilt and twist correction on top of height, side, and depth — a meaningful advantage on runs with hardwood or plywood drawer fronts that need independent corner adjustments. For production shops aligning a kitchen's worth of doors in a single pass, those extra axes cut the time spent shimming and re-hanging. For a custom installer fitting an inset or near-flush front, the depth and twist axes resolve the fits that two-axis devices leave unresolved. The 21 inch length suits standard base cabinet drawers with nominal 21 inch interior depths, covering the bulk of kitchen pulls, deep utility drawers, and pot-and-pan layouts.

Build and Finish

The Quadro V6 5D runs on ball bearings rather than the roller-wheel carriages found in economy undermounts — a difference that shows up as tighter lateral feel and consistent travel as the drawer is loaded unevenly. Steel construction with a zinc finish handles years of indoor service without corrosion concern. Because the slide rides entirely beneath the drawer box, the zinc finish is functional rather than decorative; what the homeowner sees is only the bottom of the drawer box. Drawer sides from 1/2 inch through 5/8 inch (12.7 to 16mm) are supported; this is the standard side-thickness version and does not fit 3/4 inch material.

Who This Slide Is For

Cabinet shops and installers who want the full benefit of five-axis front alignment — particularly on jobs with slab fronts, painted faces, or tight reveals — will find the 5D version worth the step up from a 3D or 4D model. The slide fits both face-frame and frameless construction, so it works across the two main cabinet conventions without swapping to a different product line. Homeowners completing a kitchen renovation who want a concealed, quiet-closing slide with maximum adjust-ability after installation will get the same benefit.

Precision Fit, Five Directions

For installs where every front needs to land exactly right, the Quadro V6 5D's five-axis adjustment turns a tedious alignment process into a straightforward one — add the left-hand member, the series locking devices, and the rear brackets your cabinet construction requires, and this slide is ready to work.