Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass 6610 series drawer slides provide a standard epoxy coated euro slide that supports cabinet drawer motion in everyday use. The 19-3/4 inch length suits common cabinet depths, helping drawers reach a comfortable opening without overextending. The 3/4 extension design lets drawers open far enough for practical access while keeping part of the drawer supported inside the cabinet. A 100 lb rating per ANSI/BHMA testing means the slides are tested to carry typical drawer loads in cabinetry applications. The epoxy coated finish on these euro slides creates a smooth bearing surface during travel, which supports consistent movement over time. The standard 1/2 inch side clearance gives a clear target for cabinet and drawer box sizing, simplifying layout when building or retrofitting. A single captive design will absorb tolerances up to 2 mm, helping drawers run very smooth even when cabinet construction is slightly out of perfect square.
These Grass America slides are classified as side mount drawer slides yet are described as bottom mount with additional holes for side mount, so they support cabinet installations that reference either mounting surface. The configuration gives flexibility when working with face frame or frameless cabinet designs that may favor one reference edge. Standard 1/2 inch side clearance defines the lateral fit between drawer and cabinet, which guides drawer box width during fabrication. The 19-3/4 inch nominal length relates to 505 mm sizing, aligning with metric cabinet layouts where needed. Holes in both members for #6 FHP or euro screw allow fastening from cabinet member to cabinet side and drawer member to drawer side, which supports secure attachment in typical woodworking materials. The parallel self closing action at 2-5/8 inch interacts with the slide travel so drawers pull closed consistently once they reach that point.
The Grass 19-3/4 inch 6610 series epoxy coated euro slides are positioned for cabinet drawer use where a side mount drawer slide with euro styling is preferred. Their classification as side mount drawer slides guides them toward installations on cabinet interior sides rather than under-mount configurations. The bottom mount description with additional holes for side mount means they can be anchored along the bottom edge while still fastening through side-oriented holes, which suits drawer boxes built with various side heights. A 100 lb rating per ANSI/BHMA testing supports use in general storage drawers that hold household items, shop supplies, or hardware where loads remain within that tested capacity. The 32 mm system compatibility ties these slides to cabinet line boring patterns that follow a 32 mm spacing, which fits production shops and serious DIY layouts using metric hole systems. The 19-3/4 inch length also fits many base and tall cabinets where full depth is not required.
The single captive design that will absorb tolerances up to 2 mm matters when drawers are built from wood or composite materials that can vary slightly in width, because the slide can still run very smooth without binding from small deviations. The epoxy coated finish on these euro slides reduces friction along the slide path, which helps drawers move more consistently over repeated openings in residential or shop environments. Standard 1/2 inch side clearance across this Grass 6610 series makes it easier to standardize drawer widths, saving layout time when repeating cabinet sizes. The parallel self closing action at 2-5/8 inch creates a defined closing zone where the slide assists the final movement, helping drawer fronts align with cabinet faces for a tidy run of fronts. Holes in both members for #6 FHP or euro screw streamline installation because fastening points are already patterned to accept common cabinet fasteners. The 32 mm system compatibility further supports repeatable results, since slide holes relate to established drilling patterns for efficient production and accurate hardware alignment.
The Grass 6610 series is a side mount drawer slide with a standard epoxy coated euro design, which supports cabinet drawers mounted to the cabinet sides during installation.
The Grass America 13057-09 slides are 19-3/4 inch long, matching a 505 mm nominal length, which fits many cabinet depths following either imperial or metric layout.
The Grass 6610 series slides have a 100 lb rating per ANSI/BHMA testing, meaning they are tested for drawer loads up to that capacity in cabinetry applications.
These 19-3/4 inch epoxy coated slides use a standard 1/2 inch side clearance, guiding drawer box width so the slides run smoothly between the cabinet sides.
The Grass 6610 series provides parallel self closing action at 2-5/8 inch of travel, so once a drawer reaches that point, the slides assist the final closing motion.
The Grass 6610 series is 32 mm system compatible, so its mounting pattern relates to common 32 mm cabinet line boring used in many production and shop setups.
The Grass 19-3/4 inch 6610 series side mount drawer slides from Grass America combine epoxy coated euro construction, 100 lb ANSI/BHMA tested rating, and standard 1/2 inch side clearance for dependable cabinet drawer motion. The single captive design that will absorb tolerances up to 2 mm supports smooth travel even when cabinet or drawer dimensions vary slightly. Parallel self closing action at 2-5/8 inch helps drawer fronts pull consistently into alignment, while 32 mm system compatibility fits production-style drilling patterns. For cabinet projects that call for a 19-3/4 inch side mount euro slide with these characteristics, choose the Grass 13057-09 6610 series to align with this performance profile.
Sold In: 100 Each
