Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer member from Grass America's 6610 series — a 19-3/4 inch (500mm nominal), white epoxy-coated, roller-bearing component sold as a single handed piece for production ordering and member-level replacement. It is the drawer-side half of the 6610 slide system, riding inside the matching cabinet member to carry the drawer in and out.
The 6610 drawer member is designed for cabinets where the slide mounts at the bottom edge of the drawer side — traditional production cabinetry, closet systems, vanities, and renovation work on existing 6610-series installations. The 19-3/4 inch (500mm nominal) length suits standard kitchen base-cabinet drawer depths and matches the 6610 cabinet member of the same nominal length. White is the go-to finish when the box interior is white melamine or similarly light-toned material; the epoxy coating blends in rather than standing out as a hardware line.
The member is steel with a white epoxy powder-coat finish, the same construction Grass uses across the 6610 line. Epoxy powder-coat is a baked-on finish chosen for color consistency across production runs — so a replacement member ordered later will match the originals already in the cabinet. This is a functional interior finish suited to dry indoor cabinetry. The Grass 6610 series is made in the USA.
Cabinet shops running high-volume builds order drawer members and cabinet members separately so they can stock exactly the count of each handed component they need without overbuying. Renovation contractors replacing a damaged half of an existing 6610 installation also reach for single members rather than full sets. Either way, member-level ordering from Grass's 6610 program is the most efficient path when a complete slide set would leave unused pieces on the shelf.
One drawer requires a left-hand and a right-hand drawer member plus the matching left-hand and right-hand cabinet members, all from the 6610 series. Two left-hand drawer members will not make a working pair. Cabinet members and rear sockets are separate SKUs in the 6610 program.
Not automatically. The product attribute reads Standard, which in the data means no closing mechanism is claimed for this SKU. The Grass 6610 series as a whole is designed with 60mm parallel self-closing action per the Grass catalog, but confirm the closing behavior against the matching cabinet member and the 6610 catalog before specifying — the motion feature on a roller slide lives in the combined assembly, not in the drawer member alone.
Grass states the formula for the 6610 series: drawer width equals inside cabinet width minus 25.4mm (1 inch), leaving 1/2 inch of side clearance per slide. Build the drawer box to the 500mm nominal length and use drawer side material from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick.
No. The 6610 and 6600 are separate series with series-specific members and rear sockets. Use 6610 members only with 6610 cabinet members and the correct 6610 rear sockets.
The product attribute lists 100 lb. Note that the Grass catalog rates the 6610 series at 75 lb dynamic; confirm against the current Grass 6610 catalog for your application before specifying at the higher figure.
Ordering at the member level keeps your stock lean and your builds moving — the white 6610 left-hand drawer member delivers the finish and the fit the series is built around, one piece at a time.
Sold In: 100 Each
