Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a complete Grass 6610 series slide set for one drawer — a 16 inch (400mm nominal), white epoxy-coated, bottom-mount roller slide with 3/4 extension, sold as the full set so a single line item outfits a single drawer.
The Grass 6610 is built for traditional and production cabinetry where the slide tucks under the bottom edge of the drawer side rather than running along the full side panel. That bottom-mount position suits face-frame construction and casework styles where keeping hardware out of the visual field matters. At 16 inches — the 400mm nominal length — this set is well matched to standard vanity drawers, closet pull-outs, and shallower kitchen drawers. Cabinet shops running consistent drawer depths in volume builds benefit most from the complete-set format: one SKU, one drawer, no component matching required.
The 6610 is steel with an epoxy powder-coat finish in white, the same color family as white melamine interiors and painted cabinet boxes. The white finish is a deliberate match choice, not just a default: in cabinets where the interior is white or near-white, the slide disappears rather than drawing the eye. Nylon rollers run in the formed steel tracks, providing smooth, low-friction travel without the noise that uncoated steel-on-steel contact can produce. The Grass 6610 is made in the USA.
The 6610 mounts at the bottom edge of the drawer side with 1/2 inch of side clearance per side. Build the drawer box 1 inch narrower than the inside cabinet width — Grass states the sizing formula directly: drawer width equals inside cabinet width minus 1 inch (25.4mm). The slide accommodates drawer material from 1/2 inch (12.7mm) up to 3/4 inch (19mm) thick. In face-frame cabinets, rear sockets or mounting brackets support the back end of the slide; those components are series-specific to the 6610 and sold separately.
The Motion Technology attribute on this SKU reads Standard, which in the data means no closing mechanism is claimed. However, the Grass 6610 is described in the Grass catalog as a self-closing slide with 60mm of parallel self-closing action. Treat the slide as self-closing per Grass's published product documentation, and verify with Grass America if your application requires confirmation before specifying.
No. The 6610 is Grass's bottom-mount slide; the 6600 is the side-mount version. Members, sockets, and mounting brackets are not interchangeable between the two series. Order 6610 components only for 6610 installs.
This is a 3/4-extension slide. On a 16 inch slide the drawer opens roughly 12 inches of clear travel — the back few inches of the drawer stay inside the cabinet at full extension. If full access to the rear of the drawer is required, a full-extension slide is the right specification.
The product attribute lists 100 lb, but the Grass catalog rates the 6610 at 75 lb dynamic. Specify to the conservative 75 lb dynamic figure for design purposes, and confirm with Grass America's current documentation for any load-critical application.
No. This listing is a complete set — everything needed for one drawer ships in a single line item. The slide is also non-handed, so both sides of the drawer use the same part.
Match the 16 inch set to your cabinet depth, size the drawer box to the 1 inch clearance formula, and this Grass 6610 white set is ready to go in — one SKU, one drawer, consistent white finish throughout the cabinet interior.
Sold In: 20 Set
