Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass 6610 Series drawer slides are bottom mount, standard epoxy coated Euro slides designed for 19-3/4 inch drawers, so they fit common 500 mm cabinet depths in metric-based shops. The slides are classified as side mount drawer slides with additional holes for side mounting, giving flexibility when matching existing cabinet construction. A 100 lb rating per ANSI/BHMA testing means the slides handle typical kitchen, bath, and shop drawer loads within a recognized performance standard. The standard 1/2 inch side clearance works with common cabinet and drawer layouts, simplifying planning across multiple box sizes. A single captive design will absorb tolerances up to 2 mm and still run very smooth, which supports real-world construction variations in carcass or drawer width. An epoxy coated finish in white provides a consistent appearance across a run of cabinets.
The bottom mount configuration supports mounting the slide along the bottom edge of the drawer, while the additional holes allow side mounting as needed for cabinet design. Standard 1/2 inch side clearance defines the gap between drawer side and cabinet side, guiding drawer box sizing. The single captive design that absorbs up to 2 mm of tolerance helps drawers run smoothly even when clearances vary slightly, which is common in production work. Holes in both members sized for #6 FHP or Euro screw support typical fastener choices used in cabinet shops. The parallel self closing action at 2-5/8 inch of travel defines where the closing feature engages, which aids in planning drawer front reveals and alignment.
These Grass 19-3/4 inch drawer slides match a 500 mm length, aligning with metric-based cabinet depths often used in Euro-style construction. The bottom mount style suits drawer boxes designed to sit on the slide, while the additional side mount holes connect with cabinets built around side-mounted hardware. Standard 1/2 inch side clearance brings the slides into typical frameless and face frame drawer layouts, so dimensions transfer across different cabinet lines. The 32 mm system compatible design supports use in cabinets drilled on 32 mm centers, which matches line boring equipment and CNC programs in many production shops. An epoxy coated white finish ties visually to light interior cabinet finishes that are common in kitchen and bath jobs.
The single captive design absorbs up to 2 mm of tolerance, which addresses minor differences in drawer width or cabinet opening that occur in wood-based construction. This design helps keep motion smooth even when individual cabinets vary slightly. The 3/4 extension travel provides access to the majority of the drawer interior, supporting everyday storage without requiring full-extension hardware. Parallel self closing action at 2-5/8 inch of travel means the slide begins to pull the drawer into its closed position from that point, which helps maintain consistent reveals across a row of fronts when drawers are gently pushed. A 100 lb rating per ANSI/BHMA testing places these slides in a load class suited to many kitchen, bath, and utility drawers that stay within that capacity. Holes for #6 FHP or Euro screw in both members support a repeatable fastening pattern, aligning with typical shop tooling and screw inventory.
The Grass 19-3/4 inch drawer slides correspond to a 500 mm slide length, so they match drawers designed around that depth in Euro-style or metric-based cabinet layouts.
The Grass 6610 Series slides install as bottom mount slides, and the additional holes for side mount allow fastening through the side, matching different cabinet and drawer construction styles.
The standard 1/2 inch side clearance defines the space between drawer and cabinet sides, guiding drawer box width so drawers run properly within the Grass 6610 Series slides.
The single captive design on these slides absorbs up to 2 mm of tolerance, allowing drawers to run very smooth even when cabinet or drawer widths vary slightly from nominal dimensions.
The 100 lb rating per ANSI/BHMA testing indicates the Grass 6610 Series slides are tested to carry loads up to that level under recognized industry test procedures for drawer slides.
The 32 mm system compatible design lets the Grass 6610 Series slides align with standard 32 mm drilling patterns, supporting efficient use with line boring or CNC-drilled cabinet parts.
The Grass America 6610 Series, 19-3/4 inch bottom mount drawer slides combine a 100 lb ANSI/BHMA rating, standard 1/2 inch side clearance, and a single captive design that manages up to 2 mm of tolerance. For cabinet shops working in 32 mm system layouts or metric-based depths, the 500 mm length and compatible hole pattern integrate directly into existing case construction. When a white epoxy coated Euro slide fits the job requirements, this model provides a defined load rating and movement profile for planning drawer function across a full project.
Sold In: 20 Set
