Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand cabinet member for Grass's 6610 series roller slide, finished in white epoxy and sized at 17-3/4 inches (455mm nominal). It is a single component sold on its own — the cabinet-side profile that mounts in the cabinet and carries the matching drawer member. Order it when you need to stock or replace individual 6610 members rather than buying complete slide sets.
One drawer in a 6610 installation requires four components: a right-hand cabinet member, a left-hand cabinet member, a right-hand drawer member, and a left-hand drawer member. This listing covers the right-hand cabinet side only. The cabinet member mounts to the interior wall of the cabinet; the drawer member screws to the bottom edge of the drawer side and rides inside it. All four parts must come from the 6610 series — members from the 6600 side-mount series or from other brands will not interchange, and sockets are series-specific as well.
The 6610 is designed as a bottom-mount slide, mounting along the bottom edge of the drawer side. Grass's fit formula applies regardless of whether you are ordering sets or individual members: drawer width equals inside cabinet width minus 25.4mm (1 inch). The slide suits drawer material from 12.7mm (1/2 inch) up to 19mm (3/4 inch) thick.
Epoxy color on a Euro slide is a practical choice, not a decorative one. White is the finish that matches white and light-gray melamine interiors — the standard interior in most production kitchen, vanity, and closet cabinetry. Because the cabinet member sits against the cabinet wall and the drawer member travels with the box, a finish that blends with the interior means neither piece calls attention to itself when the drawer is open. The 6610 series is also available in almond for warmer or natural-wood interiors; choose the finish that matches your cabinet box, not the door.
Production cabinet shops that run the 6610 series buy individual members to keep component inventory lean — ordering left and right cabinet members and drawer members separately means no waste when a run calls for an odd count. Replacement and service work is the other common use: a bent or damaged cabinet member on an existing 6610 installation can be swapped without pulling the whole slide pair. Designers and contractors specifying 6610 series hardware for new work will more often start with complete slide sets; the individual member listing is for those who already know the system and want component-level control.
No. This is the right-hand cabinet member only. A working drawer requires this part plus a left-hand cabinet member and both handed drawer members, all from the 6610 series.
The 6610 series includes a parallel self-closing action built into the slide system. Whether that feature is active depends on having both the cabinet and drawer members correctly installed together — a cabinet member alone does not close anything.
No. The 6600 and 6610 are separate series with series-specific members and sockets. They do not interchange.
The 6610 is a 3/4-extension slide. At full open, the last few inches of the drawer remain inside the cabinet. It does not provide full access to the back of the drawer.
The 455mm nominal length corresponds to the 17-3/4 inch size listed. Order by the inch size that matches your cabinet depth; Grass's 6610 line runs in standard nominal increments.
When you know the 6610 and want exactly the parts you need, ordering individual members keeps inventory tight and replacements straightforward. Add the right-hand cabinet member, then complete the set with its left-hand mate and the matching drawer members.
Sold In: 100 Each
