Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer member for the Grass 6610 series epoxy roller slide, a 17-3/4 inch (450mm nominal) white epoxy-coated steel component sold as a single handed piece. It attaches to the bottom edge of the drawer side and rides in the matching 6610 right-hand cabinet member, delivering 3/4-extension roller travel in a finish that disappears against white cabinet interiors.
The 6610 drawer member is the component that travels with the drawer box. It screws to the bottom edge of the right-hand drawer side, then seats into the right-hand cabinet member already mounted in the cabinet. Production cabinet shops and millwork operations use member-level ordering to stock exactly what each run needs — left-hand and right-hand drawer members, matched with their respective cabinet members — rather than buying complete sets they have to break apart. Replacement installs benefit the same way: a damaged right-hand drawer member can be swapped without touching the cabinet side of the hardware.
The 17-3/4 inch length (450mm nominal) suits cabinets with roughly 18 inches of usable interior depth — a common dimension in kitchen base cabinets and bathroom vanities built on standard box depths.
Grass applies a baked epoxy powder coat to the 6610 members in white and almond so each finish matches a common cabinet interior color. On white melamine cases the white member reads as part of the box rather than a visible piece of hardware. The steel substrate carries the load; the epoxy is the color and surface protection layer, not a structural choice. The 6610 is made in the USA by Grass America.
One note on motion: the Motion Technology attribute for this SKU reads Standard. Per the Grass catalog, the 6610 series carries a 60mm parallel self-closing action built into the slide geometry — confirm the closing behavior against your Grass catalog or the cabinet member specification before specifying a non-self-closing application.
Cabinet shops running white-interior frameless or face-frame boxes reach for member-level SKUs when they want to control inventory by component rather than by complete-slide sets. Designers and contractors sourcing replacement parts for existing Grass 6610 installations will find the 17-3/4 inch white right-hand drawer member a direct drop-in. Homeowners replacing a single damaged slide on a white-cabinet vanity or kitchen run can also order this member on its own without buying hardware they don't need.
No. The drawer member rides inside the cabinet member — you need a right-hand 6610 cabinet member mounted in the cabinet to make a working slide on the right side of the drawer. One full drawer requires a right-hand cabinet member, a right-hand drawer member, a left-hand cabinet member, and a left-hand drawer member.
No. The 6610 and 6600 are separate series with their own members and sockets. Use 6610 drawer members only with 6610 cabinet members.
Per the Grass catalog, the 6610 suits drawer sides from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick.
The 6610 is a 3/4-extension slide. At full open, the back few inches of the drawer remain inside the cabinet — this is standard for Euro roller slides and is not the same as full extension.
Yes — the 6610 series is available in almond as well as white. Select the finish that matches your cabinet interior.
Ordering by the member means no leftover hardware and no guesswork — the white right-hand 6610 drawer member goes exactly where it's needed, in the finish that belongs there.
Sold In: 100 Each
