Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass 6610 series 14 inch bottom-mount roller slide is a steel, epoxy-coated Euro slide in white, designed for traditional and production cabinetry where a clean cabinet interior matters. It mounts at the bottom edge of the drawer side, carries the drawer on nylon rollers, and delivers 3/4 extension travel on a standard-motion platform.
The 14 inch length suits shallower drawers in base cabinets, bathroom vanities, and closet units where a full 22 inch slide would leave hardware dangling in an undersized cavity. It is the right call for utility drawers, linen pulls, and accessory trays where the contents are light and full rear access is not a requirement. Standard motion is also the correct choice anywhere a closing mechanism would interfere, such as a retrofit drawer that will later receive a push-to-open insert — no ramp to fight.
Steel members carry the structural load while nylon rollers handle the rolling contact, keeping noise low without sacrificing durability for indoor cabinet work. The white epoxy powder coat is baked on for a consistent, furniture-grade appearance. White is the finish to specify when the cabinet box is white melamine, white-painted plywood, or any light interior where a zinc or almond slide would read as a visible seam. The 6610 is a Grass America product made in the USA.
Cabinet shops running white-interior kitchens, bath vanities, or closet systems reach for the 6610 when the box material is white and a roller slide fits the budget. The non-handed, 14 inch format is easy to inventory and pull for shallow drawers without managing left and right bins. Contractors refacing or replacing drawers in existing white-interior cabinetry also find the bottom-mount profile familiar — it follows the same mounting geometry as the wooden center runners it often replaces, just on both sides of the box.
Neither. The Motion Technology on this slide is Standard, meaning there is no closing ramp, spring, or damper. The drawer rolls freely and stays open or closed wherever it is left. If you need a self-closing ramp, look at other 6610 configurations.
This is a 3/4-extension slide. On a 14 inch slide, the back few inches of the drawer remain inside the cabinet at full open. It does not bring the entire drawer contents out to the cabinet face — that requires a full-extension slide.
Allow 1/2 inch of side clearance per side. Build the drawer box 1 inch narrower than the inside cabinet width. Grass specifies the formula as: drawer width equals inside cabinet width minus 25.4mm (1 inch).
The Grass 6610 series suits drawer material from 1/2 inch (12.7mm) up to 3/4 inch (19mm) thick — standard plywood and solid-wood drawer sides both fall in range.
This listing is the complete slide set for one drawer — both sides are included in one line item, so one quantity covers one drawer opening.
When the cabinet interior is white and the drawer is shallow, the Grass 6610 in 14 inch white epoxy delivers a tidy, hardware-invisible result on a proven roller-slide platform. Size the drawer box, confirm the 14 inch length fits your cabinet depth, and add to cart.
Sold In: 20 Set
