Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer member of the Grass 6610 series — an epoxy-coated, roller-bearing, 3/4-extension Euro slide component in white, sold as a single handed piece for production or replacement work on one side of the drawer.
The drawer member is the component that fastens to the bottom edge of the drawer side. It rides inside the cabinet member and carries the drawer box in and out of the cabinet. In the 6610 series, the drawer member mounts at the bottom edge of the drawer side with 1/2 inch of side clearance per side — build the box 1 inch narrower than the inside cabinet width to leave the correct clearance on each side. The 6610 series suits drawer material from 12.7mm (1/2 inch) to 19mm (3/4 inch) thick. This member is the left-hand piece; you need one left-hand and one right-hand drawer member, together with matching left-hand and right-hand cabinet members, to run a single drawer. 6610 members do not interchange with Grass 6600 members or with members from other brands.
The white epoxy powder-coat is a baked finish over steel, chosen to match white and light-toned cabinet interiors — a practical consideration in any run of white-box kitchen or closet work where exposed hardware is a visual distraction. Epoxy is a finish choice, not a structural upgrade; the steel core carries the load. The 6610 program is also offered in almond for cabinetry with warmer interior tones, so confirm the finish matches your box before ordering.
Production cabinet shops building white-interior boxes are the core buyer here — ordering left- and right-hand drawer members separately lets them stock each hand independently and pull exactly what the cut list calls for. Replacement work is the other clear use case: a damaged drawer member on a 6610 installation can be swapped out without replacing the cabinet member or the full slide set. The standard-motion design (no self-close ramp) also makes this the right drawer member if the opening is being retrofitted with a push-to-open system that conflicts with a closing mechanism.
No. This is the left-hand drawer member only. To run one drawer you also need a right-hand drawer member and matching left-hand and right-hand cabinet members, all from the 6610 series.
No. The motion attribute is Standard, meaning no self-close ramp is built in. The drawer rolls freely and stays where it is left. If you need self-closing action, look at the 6610 sets with the self-close feature.
No. The 6600 and 6610 are separate series with series-specific members and rear sockets. Use 6610 members with 6610 cabinet members only.
The 6610 series suits drawer material from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick.
The 6610 is a 3/4-extension slide. At full open, the rear portion of the drawer stays inside the cabinet — this is the standard Euro travel class, not full access to the back of the box.
Order the left-hand drawer member, match it with the right-hand mate and both cabinet members from the same 6610 series, and the drawer runs quietly on white epoxy profiles that disappear into the cabinet box.
Sold In: 100 Each
