Grass 19-3/4" 3/4 Extension Standard Epoxy Coated Euro Slides 6610 Series, Unhanded Side Mount Almond - 30758-05
Description
Grass 6610 Series Drawer Slides For Cabinet Use
Grass 6610 series drawer slides are standard epoxy coated euro slides designed as side mount drawer slides in the Drawer Slides & Accessories category. The 19-3/4 inch length supports typical base or wall cabinet drawer depths, giving a predictable stroke for residential or commercial casework layouts. The 3/4 extension action lets the drawer open far enough for access while maintaining engagement in the cabinet member for support. The unhanded design means either slide can be used on either side, helping streamline layout on production runs or small batches. A 100 lb rating per ANSI/BHMA testing establishes the load performance in a standardized way, which matters when drawers must support typical contents in kitchens, offices, or shop storage. The almond color epoxy coating provides a consistent finished look that coordinates with many cabinet interiors while covering the steel with an epoxy layer.
Key Grass 6610 Details That Support Workflow
- The bottom mount design with additional holes for side mount provides flexibility in how the slide is positioned on the cabinet, which helps align with differing cabinet constructions while using the same slide SKU.
- A standard 1/2 inch side clearance is built into the design, so cabinet and drawer widths can be engineered around a common gap that simplifies sizing and repeat machining.
- The single captive design will absorb tolerances up to 2 mm, allowing drawers with minor width or alignment variation to still run very smooth across multiple openings.
- Parallel self closing action at 2-5/8 inches pulls the drawer into its final position in a controlled motion, which helps bring fronts into a consistent closed line without extra adjustments.
- 32 mm system compatible hole positions support integration into 32 mm line-bored cabinet construction, tying the slide mounting directly to standard system holes for repeatable installations.
- Holes in both members for #6 FHP or Euro screw give a choice of common fasteners, letting the installer match existing shop standards for driving and holding strength.
Mounting Grass America Slides To Fit Your Cabinet
These Grass America side mount drawer slides are specified as bottom mount with additional holes for side mount, so they can be fastened along the cabinet side or set on the cabinet bottom as supported by the hole pattern. The 19-3/4 inch, or 500 mm, length ties directly to metric-based layouts and imperial planning, which helps align the slide with both 32 mm system drilling and common cabinet depths. The standard 1/2 inch side clearance dimension defines the space between the drawer side and cabinet, guiding drawer box width so the slide operates without binding. Holes in both members for #6 FHP or Euro screw allow the cabinet and drawer members to be anchored directly into wood or system holes using either flat head Phillips or Euro screws for secure mounting.
Where These 19-3/4 Inch Slides Perform Best
Using Bottom Or Side Mount In Cabinet Runs
The Grass 19-3/4 inch 3/4 extension standard epoxy coated euro slides function as bottom mount with additional holes for side mount, so they can serve in cabinets where the slide is supported on the bottom panel or fixed to the side wall using the alternate holes. In a line of cabinets built on the 32 mm system, the 32 mm system compatible layout lets the installer place the slides using standard line-bored holes rather than custom drilling, improving repeatability from cabinet to cabinet. The 19-3/4 inch length fits drawers designed around a 500 mm slide, which is a common size for many base and tall cabinet sections. Because the slides are unhanded, a single part can be placed on either the left or right, simplifying inventory and avoiding sorting during installation. The almond epoxy coated finish presents a light, neutral color on both cabinet and drawer members, which matches many interior finishes and keeps the hardware visually consistent across a project.
Design Details That Support Smooth Operation
The Grass 6610 series uses a single captive design that will absorb tolerances up to 2 mm, so drawers that vary slightly in construction width still run very smooth without binding or racking in the slide. The standard 1/2 inch side clearance specification defines the horizontal gap needed on each side, which helps drafters and shop personnel size drawer boxes accurately so every opening behaves predictably. Parallel self closing action at 2-5/8 inches provides a consistent pull-in point, drawing the drawer closed from a short distance and bringing fronts into alignment without excessive slam. The 3/4 extension movement offers a balance between access and support, keeping part of the slide engaged inside the cabinet while most of the drawer interior becomes reachable. A 100 lb rating per ANSI/BHMA testing documents how the slide has been tested under standardized conditions, supporting its use in drawers that carry typical household or office loads over time.
Common Questions About Grass 6610 Slide Details
What drawer length works with the 19-3/4 inch slides?
The Grass 19-3/4 inch, or 500 mm, slides match drawers designed around that slide length, so cabinets planned on 500 mm hardware can use this model for consistent depth.
How does the 1/2 inch side clearance affect drawer sizing?
The 1/2 inch side clearance means each drawer should be built narrower than the cabinet opening by that amount per side, helping the slides move freely without rubbing.
Where can these Grass 6610 series slides be mounted?
The Grass 6610 series slides are described as bottom mount with additional holes for side mount, so they can be fastened to the cabinet bottom or side as hole patterns allow.
What does the 100 lb rating per ANSI/BHMA indicate?
The 100 lb rating per ANSI/BHMA testing indicates the slides have been evaluated under industry test standards, supporting their use in drawers carrying typical cabinet contents.
How does the single captive design help installation?
The single captive design absorbs tolerances up to 2 mm, so small variations in drawer or opening width are tolerated while the drawer still runs very smooth in use.
How does parallel self closing at 2-5/8 inches work?
The parallel self closing action at 2-5/8 inches engages near the end of travel, pulling the drawer into its final closed position and improving alignment of the drawer fronts.
Select Grass 6610 Slides For System-Based Cabinets
The Grass 6610 series 19-3/4 inch almond slides combine bottom mount capability, additional holes for side mount, and 32 mm system compatible drilling, which fits well into cabinet shops working from metric line boring. The 100 lb ANSI/BHMA rating and 3/4 extension motion define how the slides behave under load, and the single captive design with 1/2 inch side clearance supports smoother running drawers across a run of cabinets. For projects using Grass America side mount drawer slides in almond, this 30758-05 model aligns with 500 mm layouts and supports consistent, repeatable installations.
