Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a complete Grass 6610 series bottom-mount roller slide set in white epoxy — a 21-5/8 inch (550mm nominal), 3/4-extension slide designed to disappear against white melamine and painted cabinet interiors. One set carries one drawer, so one line item is all it takes to outfit a complete opening.
The 6610 is Grass America's bottom-mount roller slide, made in the USA, and the white finish is what makes it the right choice for white-box production. In a white melamine kitchen run, a painted vanity case, or a closet system with white interiors, the epoxy coating lets the hardware recede completely. The slide is not competing with the door front or the drawer face — it just stays out of sight and does its job. At 21-5/8 inches (550mm nominal), the set suits standard cabinet depths common in base and vanity work. Standard motion means no self-closing ramp — the drawer rolls freely and stays exactly where it is left, which suits applications where a self-close ramp would interfere or where the builder prefers a neutral stop.
The 6610 runs on nylon rollers inside a formed steel track, powder-coated in white epoxy. The epoxy layer is baked on and resists the everyday scuffs and cleaning that come with cabinet interiors. The steel construction gives the slide its structure under load, while the nylon rollers keep the travel quiet — no metal-on-metal contact in normal use. The white finish is a consistent, production-matched color across the Grass 6610 line, so sets ordered across a run will match. Grass also offers the 6610 in almond for interiors finished in that color.
Cabinet shops running white-interior production lines keep the 6610 white set on the shelf as a default slide for any drawer that does not need a self-closing ramp or soft-close mechanism. The non-handed, set-sold format means no sorting at the bench — pull a set, mount it, move on. Designers specifying painted or white-wrapped casework choose the 6610 because the finish is purpose-matched rather than incidental. Contractors doing installation work appreciate the straightforward fit: the slide drops into the cabinet on 1/2 inch side clearance per side, and drawer sides from 1/2 inch to 3/4 inch thick are all compatible.
No. The motion technology on this set is standard — the drawer rolls freely with no self-closing ramp. It stays wherever it is pushed. If you need a self-closing action, look at other 6610 configurations that include the ramp mechanism.
Grass specifies this slide for drawer material from 1/2 inch (12.7mm) up to 3/4 inch (19mm) thick — a range that covers most solid wood and plywood drawer box construction.
Grass states the formula directly: drawer width equals inside cabinet width minus 1 inch (25.4mm), leaving 1/2 inch of side clearance per side for the slide.
No. The 6600 is Grass's side-mount slide; the 6610 is the bottom-mount version. Members and sockets are series-specific and do not interchange between the two.
Yes. This listing is the complete slide set — both sides — for a single drawer. No additional members are required.
When the interior is white and the schedule is tight, the Grass 6610 white set removes one decision from the build: finish matching is already handled, the set is non-handed, and one line item runs one drawer from start to finish.
Sold In: 20 Set
