Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass 6610 series drawer slides use a standard epoxy coated euro slide design, giving drawers a familiar feel that installers know how to work with on cabinet jobs. The 17-3/4 inch length matches typical 18 inch drawer applications, so these slides suit many standard cabinet depths where that nominal size is called for. A 3/4 extension action means the drawer projects most of its length out of the cabinet, allowing good access while keeping part of the slide engaged for support. The slides are bottom mount, so the cabinet member fastens along the bottom edge of the cabinet opening, which helps keep the drawer square to the case. Additional holes in the design allow side mount use, giving flexibility when cabinet construction calls for a different mounting approach.
These Grass bottom mount drawer slides fasten along the bottom of the cabinet opening, which lets installers register off the cabinet floor for consistent vertical placement from unit to unit. Additional holes for side mount use allow fastening through the cabinet side, which helps when a project is laid out around side mounting or when bottom clearance is tight. The standard 1/2 inch side clearance pairs with many existing euro cabinet patterns, reducing layout changes when swapping from another 1/2 inch clearance slide. Holes in both members for #6 FHP or euro screw give installers two familiar fastener options, supporting existing screw inventories and driving tools on the shop floor.
The Grass 17-3/4 inch 6610 series slides function in cabinet applications where a 3/4 extension, standard epoxy coated euro slide is specified. Their 17-3/4 inch length lines up with nominal 18 inch drawer designs common in many base and tall cabinet layouts, keeping drawer depth consistent with established shop standards. A 100 lb rating per ANSI/BHMA testing makes these slides suitable for storage drawers that take on heavier contents, such as hardware bins, kitchen items, or shop materials. Because they are bottom mount slides with additional holes for side mount, they adapt to construction where the drawer is guided from below or from the side, which is helpful across different cabinet lines within the same facility.
The 32 mm system compatible layout ties these Grass 6610 series slides into cabinet lines drilled on the 32 mm system, so hole rows already set up on CNC or line boring equipment can be used directly for positioning. The single captive design that absorbs tolerances up to 2 mm and still runs very smooth gives some forgiveness when drawers or cases drift slightly from ideal measurements, reducing rework tied to tight slide alignment. Parallel self closing action at 2-5/8 inches helps bring the drawer fully home and maintain a consistent front reveal, which matters when banks of drawers must line up cleanly. Holes in both members for #6 FHP or euro screw allow consistent fastening through the cabinet and drawer members, supporting repeatable assembly procedures on production lines.
The Grass 6610 series is a standard epoxy coated euro slide with a 3/4 extension action, so drawers travel most of their length out of the cabinet while staying guided by the slide members.
These slides are bottom mount units with additional holes for side mount, so they can be fastened along the cabinet bottom or through the cabinet side, depending on the cabinet construction layout.
The 17-3/4 inch length aligns with many nominal 18 inch drawer designs, helping match standard cabinet depths used in base and tall cabinet configurations.
Grass 6610 series slides have a 100 lb rating per ANSI/BHMA testing, supporting drawers that carry substantial contents in residential or shop storage applications.
These slides are designed for standard 1/2 inch side clearance, so cabinet and drawer widths can follow common euro construction dimensions while maintaining proper running clearance.
The parallel self closing action at 2-5/8 inches draws the drawer into the cabinet during final travel, helping keep drawer fronts seated and reveals consistent across a bank of drawers.
The Grass 6610 series 17-3/4 inch epoxy coated euro slides bring a 3/4 extension action, 100 lb rating per ANSI/BHMA testing, and 1/2 inch side clearance into one bottom mount design. Their 32 mm system compatible layout and dual mounting options support streamlined cabinet production using existing boring patterns and construction styles. For cabinet runs built around nominal 18 inch drawers and euro slide performance, these Grass 6610 series drawer slides align hardware choice with everyday shop workflows.
Sold In: 20 Set
