Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass 6610 series drawer slides give an 18 inch nominal length with a 3/4 extension, so drawers open far enough for everyday access while keeping the slide members well supported in the cabinet. The standard 1/2 inch side clearance matches common cabinet layouts, which simplifies planning when you are working across multiple box sizes in a run. A single captive design absorbs up to 2 mm of tolerance, so minor variations in cabinet or drawer width are taken up by the slide rather than fighting you during fit and adjustment. The epoxy coated euro slide design provides a smooth running surface along the members, which supports repeatable motion under normal shop and jobsite conditions. An unhanded layout means the same slide configuration works on either side, helping streamline installation and inventory when you are doing volume cabinet work.
The bottom mount layout with additional holes for side mount lets you choose how to support the drawer box on a given job, giving options when working with different cabinet interiors. Standard 1/2 inch side clearance is built into the Grass 6610 series drawer slides, so drawer box widths can follow familiar sizing rules across your projects. The unhanded side mount setup means left and right positions use the same slide style, which keeps orientation straightforward at the bench. Holes provided in both members for #6 FHP or Euro screw create a defined fastening grid, tying each member securely to wood components for predictable tracking. The 3/4 extension travel works together with the single captive design, so the drawer moves out smoothly while the slide keeps the drawer supported inside the cabinet carcass.
The Grass 6610 series bottom mount with additional side mount holes is suited to cabinet interiors where you want the slide to register off the cabinet bottom or side panels, giving layout options within the same product family. Because the slides are 32 mm system compatible, they integrate into cabinet lines built around row-drilled holes, which is useful in frameless and system-based manufacturing. The standard 1/2 inch side clearance aligns with common drawer layouts, meaning your drawer box widths can be planned around this dimension across kitchen, bath, or shop furniture projects. With the unhanded side mount configuration, the same member pattern is used on both sides of the drawer assembly, helping streamline installation in repetitive production environments. The almond finish ties into interiors that call for a light-colored slide, maintaining a consistent appearance when drawers are open.
The single captive design on these standard epoxy coated euro slides will absorb tolerances up to 2 mm, so small differences between cabinet and drawer sizing are taken up by the slide mechanism, helping drawers run very smooth without extra fitting steps. A 3/4 extension travel length provides enough exposure of the drawer contents while still keeping part of the drawer supported by the cabinet member, which contributes to stable operation under load. The 100 lb rating per ANSI/BHMA testing defines an application range that covers many typical storage drawers, aligning the hardware with everyday residential and shop use. Parallel self closing action at 2-5/8 inches helps pull the drawer into its final position, which supports consistent front alignment when cabinets are built in banks. Epoxy coated members create a continuous running track, contributing to a controlled sliding feel that remains consistent over repeated use cycles.
Grass 6610 series drawer slides have a nominal 18 inch length with 3/4 extension, so drawer box depths are typically planned around that length to balance access with cabinet space.
The standard 1/2 inch side clearance means total drawer width is typically 1 inch less than the cabinet opening, which simplifies setting up drawer box widths across a run of cabinets.
The bottom mount design with additional holes for side mount allows the slide to register off the cabinet bottom or side panels, so it adapts to different cabinet construction approaches.
The 100 lb rating per ANSI/BHMA testing identifies the load range these epoxy coated euro drawer slides are designed for, matching many standard storage drawers in residential work.
The parallel self closing action at 2-5/8 inches draws the drawer into its final position, which helps fronts seat consistently against the cabinet and supports even reveals.
Being 32 mm system compatible means mounting holes on the Grass America slides align with common system boring patterns, which speeds layout on frameless and line-bored cabinets.
The Grass 6610 series drawer slides from Grass America combine a 3/4 extension 18 inch length, standard 1/2 inch side clearance, and a single captive design to support smooth travel with working tolerances. The bottom mount configuration with added side mount holes fits a range of cabinet constructions, while 32 mm system compatibility ties into line-bored production. With an ANSI/BHMA 100 lb rating and parallel self closing action, these almond-finish epoxy coated euro slides suit many everyday drawer applications. For projects that call for consistent motion and familiar clearances using a made in USA slide, this 30757-05 model is built for repeatable cabinet installations.
Sold In: 20 Set
