Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer member of the Grass 6610 series — a 19-3/4 inch (500mm nominal), white epoxy-coated steel roller slide component sold as a single handed piece. It pairs with the matching left-hand drawer member and both cabinet members of the same 6610 series to complete one drawer.
The 6610 drawer member attaches to the bottom edge of the drawer side and rides inside the cabinet member track. In a white-interior cabinet — white melamine, painted MDF, or white thermofoil — the white epoxy finish keeps the hardware visually neutral even when the drawer is open. That matters most in open-plan kitchens, bathroom vanities, and furniture pieces where the inside of the cabinet is visible in everyday use. This is the component to reach for when you need to replace a damaged right-hand drawer member in an existing 6610 installation, or when you are running a production batch and ordering members by hand and quantity rather than in pre-matched sets.
The Grass 6610 is a bottom-mount roller slide, meaning the slide mounts along the bottom edge of the drawer side rather than mid-side. Build the drawer box 1 inch narrower than the inside cabinet width — Grass specifies drawer width equals inside cabinet width minus 25.4mm (1 inch) — and allow 1/2 inch of side clearance per side. The series accepts drawer material from 12.7mm (1/2 inch) up to 19mm (3/4 inch) thick. Note that the Motion Technology attribute for this SKU reads Standard, which in the 6610 series context means no self-close or soft-close mechanism on this member — confirm the closing behavior of the complete slide assembly against the Grass 6610 catalog for your specific application.
Cabinet shops running high volumes on white-interior frameless cabinets often buy drawer and cabinet members separately rather than in complete sets, so they can stock each component at the quantity they actually consume. Replacement and service work is the other common use: a single damaged member can strand an otherwise good slide, and ordering one right-hand drawer member is faster and cheaper than replacing the full set. This member-level SKU serves both cases without forcing an overage.
No. This is the right-hand drawer member only. To run one drawer you also need the left-hand drawer member and both the left-hand and right-hand cabinet members, all from the Grass 6610 series.
No. The 6610 drawer member is series-specific and pairs only with 6610 cabinet members. The 6600 and 6610 are separate Grass roller slide series and their components do not interchange.
The series is designed for drawer sides from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick.
The 6610 is a 3/4-extension slide. On a 500mm nominal slide, the rear portion of the drawer stays inside the cabinet at full open — it does not bring the entire drawer out to the cabinet face.
The 6610 is designed for frameless (Euro-style) cabinet installations. Face-frame work may require rear mounting sockets or brackets; check the Grass 6610 installation guide for face-frame compatibility before ordering.
When the project calls for white-interior cabinetry and you need member-level control over your slide inventory, this 6610 right-hand drawer member lets you order precisely what the job requires — no extra pieces, no color mismatch.
Sold In: 100 Each
