
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Grass 6610 Series drawer slides are 21-5/8 inch long, 3/4 extension, standard epoxy coated Euro slides designed for cabinet drawers that need dependable guided motion. The right-hand cabinet member layout supports consistent casework drilling, which keeps installations repeatable across a production run. A 100 lb rating per ANSI/BHMA testing means the slide system is engineered to carry typical residential and light commercial drawer loads while maintaining performance requirements defined by an industry standard. The standard 1/2 inch side clearance works with common cabinet layouts, so existing carcass dimensions can often be used without redesigning the opening. A single captive design that will absorb tolerances up to 2 mm and still run very smooth helps drawers operate freely even when cabinet or drawer boxes vary slightly, which reduces rework and adjustment time. The epoxy coated finish on these Euro slides supports consistent movement along the track.
The bottom mount with additional holes for side mount means this 21-5/8 inch Grass America slide can be positioned under the drawer or on the side, which adds layout options on different cabinet projects. Standard 1/2 inch side clearance supports common drawer box sizing, so builders can keep using established drawer-width formulas. The 3/4 extension travel lets most of the drawer box move forward while leaving some length engaged in the slide, which helps support the rated load during use. Holes arranged for #6 FHP or Euro screw help installers drive fasteners quickly with the bits already set up in the shop. Because the 6610 Series uses a single captive design that tolerates up to 2 mm variance, drawers can still run smoothly when small deviations occur in case or drawer dimensions.
This Grass America 6610 Series right-hand cabinet member in white is suited to cabinet projects using Euro-style hardware where a 21-5/8 inch nominal drawer length is needed. The side mount drawer slides product class aligns with applications that expect slides to register off the cabinet side or bottom surface for alignment. Because the system is compatible with the 32 mm system, these Euro slides integrate into frameless cabinet manufacturing that uses line-bored holes for hardware location. The 3/4 extension travel works well for many kitchen, bath, and storage drawers where visibility into the rear of the drawer is less critical than maintaining compact slide travel inside the cabinet depth.
The single captive design that absorbs tolerances up to 2 mm and still runs very smooth helps maintain a consistent feel across a full bank of drawers even when the material or machining varies slightly, which supports a uniform user experience. The 100 lb rating per ANSI/BHMA testing sets an engineered load target for these Grass 21-5/8 inch Euro slides, which helps shops align drawer contents with the tested capacity. Parallel self closing action at 2-5/8 inch controls the last portion of drawer travel, which helps faces align flush against the cabinet front without relying solely on the user to position the drawer. The epoxy coated slide surfaces support the guided motion of the members, which contributes to the smooth operation described in the product data. Compatibility with #6 FHP or Euro screw fasteners lets the same slide integrate into different shop standards, supporting consistent methods across multiple projects.
The Grass 63719-09 is a 21-5/8 inch, 3/4 extension, standard epoxy coated Euro slide from the 6610 Series, which provides guided drawer movement in cabinet applications using Euro hardware.
The Grass 6610 Series slide has a 100 lb rating per ANSI/BHMA testing, so drawers built around this hardware can be planned around that engineered load capacity for typical cabinet use.
The slide uses a standard 1/2 inch side clearance, which allows builders to size drawer boxes using common formulas based on cabinet opening width.
The Grass 6610 Series slide is a bottom mount design with additional holes for side mount, giving installers flexibility in how they align and support the drawer.
The slide provides parallel self closing action at 2-5/8 inch of remaining travel, which helps pull the drawer into its fully closed position and align fronts consistently.
The Grass 6610 Series is 32 mm system compatible, so the hole pattern is designed to work with standard European line-boring layouts in frameless cabinet construction.
The Grass 21-5/8 inch 6610 Series right-hand cabinet member slide combines bottom mount flexibility, additional side mount holes, and 3/4 extension travel to support common cabinet drawer layouts. A 100 lb ANSI/BHMA-tested rating and 1/2 inch side clearance help align design decisions with known performance and sizing. The single captive design with tolerance absorption up to 2 mm and parallel self closing action at 2-5/8 inch support smooth, consistent drawer operation across multiple openings. For production shops and serious builders working within the 32 mm system, this Grass America slide offers a Euro-style motion solution tailored to cabinet work.
Sold In: 100 Each