
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Grass 6610 Series drawer slide in this configuration is a left-hand drawer member for the 6610 Series epoxy coated Euro slide system, so it provides the drawer-side component needed to complete a smooth-running slide assembly. The member is designed for the 6610 Series, so it matches the system geometry and load rating, which helps drawers operate consistently across a project. The white epoxy coated finish is specified, so the surface is protected and visually blends with common light interiors in cabinet work. The drawer member is part of a bottom mount system with additional holes for side mount, giving flexibility to match the intended mounting style on the job. This component is identified as left-hand, so it pairs with the correct right-hand pieces during installation for proper tracking and self closing function.
Standard 1/2 inch side clearance establishes the working gap between the drawer and cabinet sides, so builders can design drawer boxes and case openings to a known relationship that speeds cutting lists. The 6610 Series bottom mount with additional holes for side mount layout means the same slide platform installs in bottom or side configurations, so shops can standardize on one series across different cabinet lines. Holes for #6 FHP or Euro screw are specified in both members, so installers can choose between flat head Phillips or Euro style fasteners to match existing tooling and construction preferences without altering the slide members.
The Grass America 6610 Series is identified as a bottom mount slide with additional holes for side mount, so it fits applications where drawers are supported from below or from the cabinet side using the same slide pattern. This flexibility is useful in residential or commercial casework where some boxes are framed for bottom support while others rely on side panels. The standard 1/2 inch side clearance aligns with common Euro cabinet drawer layouts, so it fits well into projects based on 32 mm system drilling. Because the system is 32 mm system compatible, it syncs with line-bored cabinet sides, supporting efficient shop production with minimal layout changes when shifting between cabinet runs.
The single captive design is described as absorbing tolerances up to 2 mm while still running very smooth, so slight over- or under-sizing in drawer width is taken up by the slide mechanism rather than passed through as friction. This tolerance absorption reduces rework when small dimensional variations appear across batches, keeping drawers operating smoothly even when materials move slightly. Parallel self closing action at 2-5/8 inches means that, near the end of closing, the mechanism engages and draws the drawer in evenly, improving the final alignment of drawer fronts across a bank. A 3/4 extension standard slide length, combined with the 100 lb. rating per ANSI/BHMA testing, provides substantial access to drawer contents while still reserving capacity for heavier everyday loads in shop, kitchen, or office installations. Holes in both members for #6 FHP or Euro screw support consistent fastening along the slide length, helping maintain track alignment under load.
The Grass 6610 Series is a bottom mount slide with additional holes for side mount, so it works in applications where slides are attached either under the drawer or to the cabinet sides.
The 6610 Series uses standard 1/2 inch side clearance, so cabinet and drawer sizing can follow familiar Euro slide dimensions for predictable fitting.
The 6610 Series has a 100 lb. rating per ANSI/BHMA testing, so drawers built on this system can handle typical storage loads within that tested range.
The single captive design absorbs tolerances up to 2 mm while remaining smooth, so minor width variations in drawers or cabinets do not cause noticeable binding.
The web description specifies holes in both members for #6 FHP or Euro screw, so installers can match the slide to their preferred screw type.
The 6610 Series features parallel self closing action at 2-5/8 inches, so the drawer is pulled into a consistent final position near the end of travel.
The Grass left hand drawer member for the 6610 Series combines a 100 lb. rating per ANSI/BHMA testing with standard 1/2 inch side clearance, so it supports everyday storage loads while aligning with common Euro cabinet dimensions. The bottom mount design with additional holes for side mount offers mounting flexibility, and 32 mm system compatibility ties directly into line-bored casework. The single captive design that absorbs tolerances up to 2 mm, together with parallel self closing action at 2-5/8 inches, helps drawers run smoothly and land consistently. For shops and installers using the Grass 6610 Series system, this white epoxy coated left-hand drawer member serves as a matching component that integrates cleanly into production and field workflows.
Sold In: 100 Each