Amerock London Cabinet Knob For Modern Doors

Amerock London cabinet knob brings a 2-1/2 in (64 mm) length pull point to the door, giving fingers a solid surface to grab when opening heavier cabinet fronts. The knob uses faceted forms and clean geometric patterns, which present a sharp, contemporary look on straight-lined casework and face frames. Its assembled, split finish design pairs satin nickel with black chrome, so the face contrasts with surrounding hardware and trim on modern kitchens and built-ins. The 13/16 in (21 mm) width keeps the knob compact across the rail, which helps when cabinets are closely spaced. A 1-9/16 in projection pulls the gripping surface away from the door, improving clearance for knuckles. The knob is manufactured from zinc, giving it a sturdy metal construction that holds up under repeated daily pulls.

Key London Series Knob Details That Matter

• The 2-1/2 in length spreads the grip area across more of the door face, which can give users better leverage on wider or heavier cabinet fronts in kitchens or work areas.
• The 13/16 in width keeps the knob footprint narrow across rails and stiles, which helps maintain spacing on tight layouts where multiple doors and drawers sit close together.
• The 1-9/16 in projection stands the knob out from the cabinet face, providing finger clearance that supports a full hand grip without rubbing against the door surface.
• The satin nickel and black chrome split finish creates a two-tone visual, which helps tie together appliances, hinges, and other hardware that may use different metal tones.
• The zinc material construction provides a solid metal body, which supports long-term pulling forces on frequently used cabinet doors and drawer fronts.
• The base dimensions of 9/16 in by 3/8 in focus the contact area, which defines a precise mounting footprint on the cabinet face during layout.

London Series Knob Mounting And Fit Details

The London series 2-1/2 in knob uses a #8-32 x 1 in screw size, which matches a common cabinet hardware thread for fastening through standard door and drawer thicknesses. The 9/16 in by 3/8 in base dimensions set a compact footprint on the face, which helps when aligning multiple knobs in a straight visual line across doors and drawer fronts. With a 1-9/16 in projection, the knob extends far enough from the cabinet face to give a strong handhold, which is useful on tall pantry doors or deeper drawers where extra pull is needed.

Using This Knob On Cabinets And Casework

Where This Amerock Decorative Knob Works Best

The Amerock London series satin nickel and black chrome knob suits decorative hardware roles on cabinets, because its faceted forms and clean geometric patterns visually match modern casework lines. Its 2-1/2 in length offers a more substantial pull point than small round knobs, which can be helpful on wider doors and mid-size drawers in kitchens, baths, and storage pieces. The compact 13/16 in width lets this knob sit comfortably on narrow rails or smaller drawer fronts, supporting consistent use across upper cabinets, base units, and furniture-style pieces. The two-tone satin nickel and black chrome finish allows the same knob to bridge between stainless-look appliances and darker fixtures, supporting cohesive hardware runs across a room. The zinc construction gives the knob a metal weight in hand, which fits applications where hardware doubles as a visible design element on built-ins and closets.

Details That Support Repeatable Layout And Pull

The defined 2-1/2 in (64 mm) length provides a fixed reference when measuring off door edges, which helps installers keep knob centers at a consistent distance across multiple cabinets. The 9/16 in by 3/8 in base dimensions concentrate the contact area, which aids in positioning the knob within stile widths or decorative frame details without crowding edges. A 1-9/16 in projection sets the gripping surface away from the cabinet face, supporting a comfortable finger wrap when doors sit flush with surrounding panels. The #8-32 x 1 in screw size aligns with a common thread standard in cabinet hardware, simplifying selection of matching fasteners when working across a bank of doors and drawers. The combination of satin nickel and black chrome finishes on one knob makes finish selection straightforward on jobs where multiple metal tones must coexist, reducing the chance of mismatched hardware in the final layout.

Common Questions About The Amerock London Knob

Select This Knob For Modern Cabinet Projects

The Amerock London zinc knob with satin nickel and black chrome finish brings a defined 2-1/2 in length, compact base dimensions, and 1-9/16 in projection to cabinet doors and drawers. These verified details support consistent layout, comfortable grip, and a modern geometric appearance across residential or shop-built casework. For projects requiring a decorative knob that blends two metal tones while maintaining practical pull dimensions, this London series cabinet knob from Wurth Baer Supply fits that role.