Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock London cabinet pull 96mm center to center is a zinc handle designed for cabinets where a 3-3/4 in mounting pattern is already laid out, so it drops into existing drilled holes without changing your layout. The London collection uses faceted forms with clean geometric patterns, giving casework a modern, structured look that reads well on straight-lined doors and drawer fronts. A satin nickel and black chrome finish split across the pull creates a strong visual contrast, so the hardware stands out clearly against both light and dark fronts. The 6-5/16 in overall length spans wider drawer faces with a single pull, which can help doors and drawers feel visually balanced. A 1-9/16 in projection brings the grip away from the surface, giving fingers room to grab even on thicker fronts.
The 3-3/4 in center-to-center mounting on this Amerock pull lines up with a widely used hole spacing, so it is suited to both new layouts drilled at 96 mm and straightforward replacements of older pulls using that same pattern. The specified length of 6-5/16 in means the handle will extend past the mounting points in a balanced way, which helps when aligning multiple pulls in a straight run along upper or base cabinets. With a projection of 1-9/16 in from the cabinet face, the pull sits far enough out so hands clear decorative door profiles or applied fronts during use. The zinc construction supports a consistent feel across multiple units, which is useful when several pulls are mounted in a continuous kitchen, bath, or casework installation.
The London collection design on this pull brings faceted forms and clean geometric patterns, so it suits projects where straight lines and sharp details are already part of the cabinet style. On flat-panel or slab fronts, the geometry of the pull aligns with the door edges, giving a uniform run when installed across upper and lower cabinets. The satin nickel and black chrome finish combination supports use on mixed-material spaces, because the lighter satin nickel face works against darker finishes while the black chrome element ties into darker appliances or accents. At 6-5/16 in overall length, the pull visually anchors medium to wider drawers, helping hardware scale with front size rather than looking undersized. The 13/16 in width keeps the profile lean, which is practical on tighter rail heights where hardware cannot be overly tall.
The 3-3/4 in (96 mm) center-to-center dimension on this Amerock BP36648G10BCR pull provides a standard spacing that helps maintain consistent alignment from one cabinet to the next, which is important when drilling or confirming rows on longer banks of doors. A projection of 1-9/16 in sets the gripping area out from the face enough that fingers have clearance behind the bar, supporting a firm grab whether the user approaches from above, below, or straight on. The zinc material gives each pull a steady feel during operation, which is noticeable when multiple drawers are opened repeatedly along a working wall. Base dimensions of 9/16 in by 3/8 in focus the contact area at each end, keeping layout marks simple while still giving the ends enough surface to sit flat on the door. The satin nickel and black chrome split finish also creates a visual reference line across the pull, which can help installers read alignment by eye when setting heights and reviewing straight runs.
The Amerock London pull has a 3-3/4 in (96 mm) center-to-center dimension, so it suits cabinets drilled on that standard mounting pattern.
The Amerock BP36648G10BCR pull measures 6-5/16 in in overall length, giving good coverage across medium to wider drawer and door fronts.
This satin nickel and black chrome pull projects 1-9/16 in from the cabinet face, providing space for fingers to grip behind the handle.
The Amerock London cabinet pull is made from zinc, giving each handle a solid feel suitable for regular cabinet use.
This London collection pull uses a satin nickel and black chrome finish, creating a contrasting, modern two-tone appearance on cabinet fronts.
The Amerock cabinet pull has base dimensions of 9/16 in by 3/8 in, giving each end a compact footprint on the door or drawer surface.
The Amerock London cabinet pull 96mm center to center combines zinc construction with a satin nickel and black chrome finish, giving cabinets a modern, geometric look grounded in the London collection design. The 3-3/4 in center-to-center spacing matches a commonly used layout, so it works well when the drilling pattern is already set at 96 mm across doors and drawers. With a 6-5/16 in overall length, 1-9/16 in projection, and 13/16 in width, the pull delivers practical grip dimensions that translate cleanly from one cabinet opening to the next. For projects calling for a consistent, contemporary handle with this exact mounting size, this Amerock BP36648G10BCR pull is a strong match.
Sold In: 1 Each
