Amerock London Series 8 in (203 mm) Center to Center Black Chrome/Polished Chrome Pull, -BP36663BCR26
Description
Amerock London Series 8 In Pull For Cabinets
Amerock London Series 8 in pull is a zinc cabinet handle from the London collection with an 8 in (203 mm) center-to-center hole spacing, so it fits layouts drilled for that standard spread and keeps replacement or new installs consistent across doors and drawers. The pull uses a Black Chrome / Polished Chrome split finish, which creates a modern contrast on the same handle for a more defined look against the cabinet face. The faceted forms and clean geometric patterns on the London collection give the pull a structured appearance that lines up well with straight cabinet rails and edges. A length of 10-7/16 in means the pull extends noticeably past the mounting holes, giving more gripping area while matching larger cabinet fronts. A projection of 1-9/16 in sets the handle comfortably off the surface, helping fingers clear the door edge when opening.
Key London Collection Details For Daily Use
The London collection design uses faceted forms and clean geometric patterns, so the pull reads as a modern, structured piece that pairs well with contemporary cabinet lines.
The assembled, split finish design in Black Chrome / Polished Chrome creates a dramatic contrast on the same pull, helping the hardware stand out visually on painted or wood fronts.
The pull is made from zinc, giving a solid-feeling handle body that supports repeated daily use on frequently opened doors or drawers.
The 10-7/16 in overall length balances the 8 in center-to-center spacing, leaving visible bar length beyond the holes for a proportional look on wider fronts.
The 13/16 in width provides a defined gripping surface across the face of the pull, which helps fingers find the handle quickly on tall or heavy fronts.
The 1-9/16 in projection sets the handle away from the cabinet, creating finger clearance that helps when pulling from the side or at an angle.
Installation Geometry And Mounting Fit Details
The Amerock London Series 8 in pull uses 8 in (203 mm) center-to-center mounting, so screw holes need to be spaced on that pattern for a proper fit on doors or drawers. Base dimensions of 9/16 in by 3/8 in define the footprint at each end of the pull, which helps in planning where the bases land on narrow rails or stile edges. The pull mounts using #8-32 x 1 in screws, so the threaded interface is set for that screw size in typical cabinet applications. With a 13/16 in width and 1-9/16 in projection, the pull occupies a defined three-dimensional envelope on the cabinet face, which matters when laying out multiple handles close to each other.
Using This Amerock Pull On Cabinets And Drawers
Where The London Pull Works Best Visually
The London collection description highlights faceted forms and clean geometric patterns, so this pull visually suits cabinets that already use straight lines and squared profiles. The Black Chrome / Polished Chrome finish pairing creates a split finish detail, which works well where a project calls for both a dark note and a bright highlight on the same handle. With a 10-7/16 in overall length and 8 in center-to-center spacing, the pull fits especially well on wider doors or drawer fronts, where a longer handle can span more of the face and align with large panel proportions. The 13/16 in width keeps the pull from looking too thin on broad fronts, which helps the hardware read as part of the design instead of disappearing visually.
Details That Support Consistent Layouts And Operation
The 8 in (203 mm) center-to-center dimension is the core layout reference, so once that spacing is used on a run of cabinets, each Amerock London Series 8 in pull will line up in a straight, repeatable pattern. The base size of 9/16 in by 3/8 in defines how much flat surface each end of the pull covers, which is helpful when matching to rail widths or existing hole locations on a project refresh. The 1-9/16 in projection sets how far the handle stands off the cabinet, giving room behind the bar for fingers to wrap and pull without rubbing against the door or drawer face. The zinc material creates a unified pull body that supports the faceted geometry, giving the London collection its crisp lines along every edge for a consistent look across multiple cabinets.
Common Questions About The Amerock London Pull
What center-to-center size is this Amerock London pull?
The Amerock London Series 8 in pull has an 8 in (203 mm) center-to-center dimension, so it aligns with layouts drilled on that spacing for doors and drawers.
What are the overall dimensions of the London collection pull?
The London pull measures 10-7/16 in in overall length, 13/16 in in width, and has a 1-9/16 in projection, which defines the space it occupies on the cabinet face.
What material is the Amerock BP36663BCR26 pull made from?
The Amerock BP36663BCR26 pull is made from zinc, giving a solid handle body that supports the collection's faceted, geometric design details.
What finish does the London Series 8 in pull use?
The London Series 8 in pull uses a Black Chrome / Polished Chrome split finish, which creates a dramatic, two-tone look on the same piece of hardware.
How far does this Amerock pull stand off the cabinet face?
This Amerock pull has a 1-9/16 in projection, so the handle sits off the cabinet enough to give finger clearance behind the bar when opening fronts.
What screw size fits the Amerock London BP36663BCR26 pull?
The Amerock London BP36663BCR26 pull uses #8-32 x 1 in screws, so the threaded holes in the pull are sized for that screw diameter and thread.
Selecting This 8 In Pull For Your Project
The Amerock London Series 8 in pull combines an 8 in center-to-center layout with a 10-7/16 in overall length, so it suits wider doors and drawers that benefit from a longer handle. The Black Chrome / Polished Chrome split finish and geometric London collection styling give cabinets a defined modern look using one consistent piece of hardware. For projects using Amerock decorative hardware from Wurth Baer Supply, this pull offers a zinc-based option that aligns with straight, contemporary cabinet designs.
