Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock London Series pull uses the London collection design to bring faceted forms and clean geometric patterns to cabinet fronts, creating a sophisticated modern statement across kitchen, bath, or built-in projects where visual consistency matters.
The polished nickel and black bronze split finish uses an assembled, two-tone look to deliver a crisp contrast on the handle, helping the pull stand out on lighter surfaces while still tying in with darker hardware or appliances.
The pull is made from zinc, so the handle body provides a solid, uniform substrate for the detailed geometry of the London collection and supports consistent appearance from piece to piece on multi-cabinet runs.
The 5-1/16 in (128 mm) center-to-center dimension defines the hole spacing, so the pull fits layouts drilled for this common size and lets installers line up multiple handles in straight, repeatable rows.
The overall 7-1/2 in length stretches visually beyond the mounting holes, giving each door or drawer a longer visual line that works well on wider fronts or tall cabinet doors.
The 5-1/16 in (128 mm) center-to-center measurement sets the distance between mounting points, so the pull aligns directly with existing 128 mm drill patterns on cabinet doors and drawers without changing boring layouts.
The #8-32 x 1 in screw specification defines the machine screw thread and usable shaft length through the door or drawer front, matching typical cabinet front thicknesses and supporting straightforward mounting from the inside face.
The 1-9/16 in projection dimension sets how far the pull stands off the cabinet face, creating clearance for fingers to grip from below or the side while keeping the handle reasonably close to the door plane for a neat profile.
The 9/16 in by 3/8 in base size at each end concentrates contact on a compact footprint, which helps the pull sit flush on traditional frame rails or slab fronts while leaving room around the bases for touch-up work on finishes.
The 7-1/2 in overall length gives installers a simple reference for aligning the handle along drawer widths, helping center the pull visually on wide fronts or pair it symmetrically on very large drawers.
The London collection design uses faceted forms and clean geometric patterns, so the pull pairs well with flat-panel or subtly profiled cabinet doors where straight lines dominate and hardware becomes part of the overall geometric layout.
The polished nickel / black bronze split finish gives designers a way to bridge light and dark elements in one handle, letting the brighter polished nickel surfaces work against painted or light wood fronts while the black bronze ties into darker trim.
The 5-1/16 in (128 mm) center-to-center drilling makes this pull suited to cabinets laid out around the 128 mm standard, so it supports consistent spacing between handles across long cabinet runs in kitchens, baths, or workrooms.
The 7-1/2 in overall length helps the pull scale on medium to large fronts, adding a strong horizontal or vertical line that can visually balance tall pantry doors, wider drawers, or utility cabinets in shop or office environments.
The 13/16 in width keeps the handle visually present on the face without overwhelming narrow stiles, which is useful when matching hardware across mixed cabinet sizes in the same room.
The zinc construction supports repeatable detailing on each handle, helping row-after-row of London pulls look uniform when applied to banks of wall cabinets, base cabinets, or built-in storage.
The 1-9/16 in projection is suited to everyday cabinet use where hands reach from different directions, providing enough depth to grab the pull comfortably whether mounted horizontally on drawers or vertically on doors.
The compact 9/16 in by 3/8 in base dimensions help the pull land cleanly on face-frame rails or narrow slab margins, giving layout flexibility on varied cabinet designs.
The 5-1/16 in (128 mm) center-to-center measurement works with jigs and drilling templates set for this common size, helping installers repeat hole positions accurately across large projects and reduce layout time on each cabinet front.
The specified screw size of #8-32 x 1 in ties the pull to a standard machine thread, so fastener selection can follow a consistent pattern for multiple Amerock London Series pull installations.
The 1-9/16 in projection figure gives a defined standoff to factor into clearances near walls, neighboring doors, or appliance panels, helping hardware avoid contact when doors swing or drawers extend.
The 7-1/2 in overall length specification lets installers coordinate hardware placement with door stile and rail dimensions, setting the handle so its ends land consistently in relation to panel edges.
The 13/16 in width across the grip provides a predictable face dimension to align with reveals, letting hardware lines track with cabinet joints and moldings for a tidy finished appearance.
The zinc material construction supports the crisp geometry of the London collection, so each handle edge and facet aligns visually when set side by side across upper and lower cabinet rows.
The polished nickel / black bronze finish combination gives a defined two-tone line along the handle, providing a visual cue that helps align the pull consistently either horizontally or vertically during layout.
The compact 9/16 in by 3/8 in base footprint gives clear reference points at both ends, making it easier to read margins off stile edges and keep mounting positions uniform from door to door.
The Amerock London Series pull has a 5-1/16 in (128 mm) center-to-center dimension, so it aligns with drill patterns laid out for this common cabinet hardware spacing.
The Amerock BP36649PNBBR London pull is 7-1/2 in long, giving extra grip length that works well on wider drawers and taller cabinet doors.
The London collection cabinet pull is made from zinc, providing a stable base for its faceted forms and supporting consistent detailing across multiple handles.
This polished nickel / black bronze pull has a projection of 1-9/16 in, creating comfortable finger clearance between the grip and cabinet face.
The Amerock London Series pull is specified with #8-32 x 1 in screws, so it is set up for standard cabinet door and drawer front thicknesses.
The London collection pull has a width of 13/16 in across the grip, giving a substantial feel while remaining proportional on most cabinet fronts.
The Amerock London Series pull with 5-1/16 in (128 mm) center-to-center spacing, 7-1/2 in overall length, and 1-9/16 in projection lines up well with standard cabinet drilling while offering generous hand clearance.
The polished nickel / black bronze split finish and zinc construction combine London collection styling with a solid handle body, giving cabinets a defined geometric look that stays consistent across full-room installations.
The defined base dimensions, width, and specified screw size let installers work to precise measurements, which helps streamline layout when the same Amerock BP36649PNBBR pull is repeated throughout a project.
Sold In: 1 Each
